Three trees Lacquer paint Lacquer sockets Lacquer-lacquer switch fittings Fittings for decoration companies Glass bricks Drawers Cabinets Doors Ceiling fans Lamps Marble tile Mirrors Front lamps Glass sliding doors Glass furniture Marble Cabinets Kitchen wall tiles Doors Floorings Kitchen cabinet doors Glass doors Kitchen glass Sliding door bathroom tile bathroom door bathroom wall tile bathroom door size bathroom size bathroom ceiling overall bathroom bathroom design bathroom waterproof bathroom floor tile bathroom sliding door tile adhesive kitchen tile balcony tile small bedroom floor tile bedroom lamp
Socket Head Cap Screws,Hexagon Socket Head Cap Screw,Hexagon Socket Round Head Screw,Phillips Hex Head Screw
we enhanced the hardness of the screws by heat treatment which can efficiently prevent slip and break. With a stable and reliable quality, Lanejoy screws will be your best choice.
China Socket Head Cap Screws,Hexagon Socket Head Cap Screw,Hexagon Socket Round Head Screw,Phillips Hex Head Screw, we offered that you can trust. Welcome to do business with us. Machine screw,tapping screw,self drilling screw,flat head screw,Pan head screw Shenzhen Lanejoy Technology Co.,LTD , https://www.injectionnut.com
1, waterproof construction should use waterproof coating
2. Waterproofing works should be done after the hidden construction is completed and accepted
3, after the completion of waterproof construction to do two water storage test
4, the bathroom waterproof layer should not be less than 1.8 meters
5, floor drain, Yin Yang angle, pipelines and other places to do more waterproof
6, floor drain to use deodorant floor drain
7, hot and cold water left hot right cold
8, try not to walk from the ground
9, cold water pipe in the wall should have 1CM protective layer, hot water pipe is 1.5CM, so the slot to open deep
10, PPR pipe is installed to consider the thickness of a good tile, so that the pipe will not be exposed
11, only a few minutes to cook, wash vegetables for a long time, bucket must buy big
12, leading and counter basins must be matched, if not, it will not be installed.
13, toilet installation can not use cement, use silicone
14, toilets, taps should be carefully protected after installation
15, to consider the toilet pit when buying a toilet
16, the washing machine to consider whether it is drainage or drainage
17, best not to install the bathroom phone, easy to damp
18, the mirror in the bathroom must first consider the size, otherwise the mirror headlights are easy to install high
19, bathroom pipe is best to leave the access hole
20, weak electricity can not be worn in the same pipe
21, left zero, right phase grounded
22, power socket 300, switch 1.4 meters
23, switch not installed behind the door
24, a lot of sockets should be good
25, high power appliances with 16A socket, such as electric oven
26, the cassette should be used well
27, cassette must be matched with the panel, otherwise it may not be installed
28. The cross-sectional area of ​​the wires in the PVC wire conduit must not exceed 40% of the cross-sectional area of ​​the wire conduit
29, bedroom air conditioning do not face the bed
30, air conditioning hole to consider outward tilt, otherwise the rain will come in
31, lights try to consider dual control
32, the best bathroom to install splash socket
33, on the balcony to consider a socket
34, wire troughs should be horizontal and vertical, row photos, later use it
35, public flue to install the reverse valve
36. The bought electrical appliance must allow workers to read the manual
37. Instructions and warranty cards must be kept
Second, bricklayer
38, cement can not be used beyond the factory period of three months
39. Different types and grades of cement cannot be mixed
40, sand must use river sand, taste with the mouth to know
41. Wall tiles should be soaked in water for more than two hours.
42, wall tiles would rather buy a few more, do not buy less, otherwise it is prone to color
43. There cannot be two rows of non-complete bricks on a wall
44. Clean the tiles immediately after wiping
45, the ground paste marble (light color), the back of the stone to do waterproof
46. ​​To cut a 45-degree angle at the corner of the sun
47, floor tiles to be inclined to drain, otherwise easy to collect water
48, wall tiles hit the pipe mouth to use the cut form, so it looks like a whole piece of brick
49, ground marble should be dry shop
50, floor tiles must be dirty, non-slip, do not just look good
51, matt tiles difficult to clean
52, balcony floor tiles should pay attention to drainage direction
Third, carpentry
53, the best use of dried larch keel
54. After the big wooden plate is bought, it must be sawn and dried.
55. The woodwork enters the arena to play the horizontal line of the house first
56, you must buy a paint brush to prevent it from being stained.
57, ceiling fan can not be installed on the ceiling keel
58, when the color panel construction must be pre-selected
59, suspended ceiling of the ceiling shall not be greater than 300 from the wall
60. The gypsum board should be fixed with a countersunk head Tapping Screw, enter the board surface 1~2MM, and do rust treatment, can not use the gun nail
61, the distance between plasterboard nails should not be greater than 200
62, gypsum board and wall have 3MM seams for crack prevention
63, gypsum board is best done at the sun corner protection
64. Paint the paint on the top and bottom of the wooden door
65, the bottom of the bathroom door cover to brush waterproof
66. The size of the door should be the same
67, furniture as far as possible not to let the carpentry do, do not do well
68, cabinet as much as possible to buy the whole, woodworking is not good, the design is not OK
69. Each medium size must be considered well, and it is troublesome to change it.
70, do not do the dark track to do their own move the door, after no way to repair
71. If the bathroom is small, try to do the sliding door, do not open the door, take up the place
72. Uncertain woodwork must be communicated with the foreman. Do not let them make their own claim.
73. Money is the hard truth in your hand
74, children at home, less glass
75. Make sure the workers have a good look at the drawings
76, kitchen drawer is very useful
77, floor wood keel flatness is 5MM
78, wool floor to be paved 30 degrees or 45 degrees, between the board and the board to stay 2 ~ 3MM, stitches should be staggered
79, to leave 8 ~ 10MM seam between the floor and the wall
80, expansion joints should be considered when the length of the composite floor exceeds 8M
81. Minimize the use of MDF as a door cover
82. The hinges and hardware must be used well
83. The Yuba should be mounted on wooden keels. It cannot be mounted directly on the suspended ceiling.
IV. Oil workers
84, medium and dark latex paint construction do not mix with water, otherwise it is prone to color
85, Plasterboard joints to be bandages
86. It is better to have a cool cloth on the wall where there is a gap.
87, some putty on the original wall is best to get rid of, or brush again glue seal
88, try to buy a well-known brand of paint, decoration company recommended or foreman recommended not try to use
89, the weather is too wet, do not paint paint
90, paint, paint grinding to be completely dry
91. The next paint must be done after the previous paint is dry
92, metal surface paint to do rust treatment
93. The weather is too cold and the quality of paint construction will be poor
94. When the door is painted, use a textured paper to cover the hinge and the door lock
95, too hot, pay attention to ventilation
96. Apply oil on the wall when applying wallpaper
97. When you are wallpapering, you must remove the panel of switch and socket
98, light, mercerized latex paint to be completed once, make up for color differences
99. After the baseboard is installed, use putty and latex paint to make up the seam.
100. Frosted glass should be protected with newspapers
100 tips in renovation construction
I. Hydropower