>>>Related Links: Wooden Floor Installation Precautions and Paving Process

What if the floor feels wet and there is milky flow out?

(1): General floor cleaning and maintenance. According to the floor material, choose suitable floor cleaners. Before use, according to the degree of contamination, pour the appropriate amount of floor cleaner into the bucket to dilute, and then drag the mop from the room to the doorway. If it is corners or floor seams that are difficult to clean, you can use an old toothbrush to directly infiltrate difficult-to-clean stubborn dirt on floor cleaners. You can also pour floor cleaners onto rags, wipe them, and then rinse with clean water. can.

However, in some floor cleaners, the concentration of surfactants is relatively high. After being dragged to the ground, the semi-wet ground is more likely to be contaminated with dirt. As a result, the soil becomes more and more dirty. Therefore, special attention should be paid to selecting products with good reputation. If you want to let the grindstone or Dali ground after cleaning, but also with a shiny light effect, you may wish to use the floor wax with water wax formula, after use, as long as it is allowed to dry.

(2): Cleaning and maintenance of wooden floors. Do not wipe directly with a wet mop. Use a special cleaning agent for the wooden floor to clean the floor so that the floor retains its original moist texture and natural colors, and prevents cracking of the wooden board. Note that in order to prevent excessive moisture from penetrating into the wood floor and cause moldy, rotting, the mop should be wrung out as much as possible when using floor cleaners. If the surface has not been treated with light, it is not advisable to contact the water. It is better to try it out in an inconspicuous place. After determining that there are no problems, use it on a large area. If you want to avoid long-term stamping and wear on the floor, you can always keep it shiny, and after the floor is cleaned, you can add a layer of wood floor wax maintenance agent. However, be aware that it is important to wait until the floor is completely air-dried before waxing so that the wax layer does not completely adhere to the wooden floor. Instead, it gives the floor a little white spot. And it is best to use a flat sponge mop, so as to avoid the general mop cotton residue left on the floor with the agent.

Needless to lay the laminate flooring, how to bury the pipeline?

If there is no keel, try not to let the line tube go to the ground, so as not to affect the paving and use of the floor in the future. When there are not many pipelines, the route from the skirting line is also OK, but after a period of time, the floor and the baseboard near the pipeline are easy to arch and deform. The best way is to slot the wall and allow the pipeline to walk from the wall. This will not only facilitate the laying of laminate flooring, but also facilitate future maintenance.

What is a wool floor?

Whether it is solid wood flooring or composite flooring, in order to improve the comfort of the future and increase the sense of foot, many families will add a layer of blockboard, pine board or plywood before the floor, which is commonly known as wool floor or small floor. Before laying the wool floor, be sure to level the floor and lay the keel well. The material of the wool floor should not be too poorly selected so as not to affect the service life of the floor in the future.

How to refurbish the laminate flooring?

Floor refurbishment is mainly to polish the old lacquer, re-scrape putty, paint on both sides. This is a good practice for solid wood floors. It can save costs, maintain floor stability, and give the ground a new look. However, renovations are not considered for laminate flooring. The refurbishment grinding will remove the surface of 0.5-1mm. The surface of the laminate flooring is a very thin aluminum oxide wear layer. The surface of the parquet is only about 0.6-2mm, so it cannot be refurbished. Compared to solid wood flooring, composite flooring is affordable and can be replaced directly with the old one. And now someone specializes in floor recycling, and old, well-made laminate floors can also be recycled.

Three-layer parquet and multi-layer solid wood laminate which is better?

All of them are solid wood composite floors. They are solid wood veneers or puzzles of different wood species and are made of green plastic under high temperature heat and pressure. Among them, three-layer solid wood composite flooring is laminated by three layers of solid wood veneers. The thickness of the surface layer is very good, can reach about 2mm, more wearable, the middle layer, the bottom layer commonly used pine, fir balance stability, relatively high cost; multi-layer solid wood flooring surface is very thin, only about 0.6-1mm, the bottom Made of mixed wood, quality depends mainly on the glue used. Therefore, if the budget is sufficient, Xiao Bian still suggests that we should choose three-layer parquet flooring.

What kind of flooring do you have for your pet?

In order to raise pets at home, you often have to pay attention to three issues when purchasing floors: 1. The pet's claws may scratch the floor surface, so the hardness of the floor surface is better; 2. Pets are sometimes “conveniently” on the ground and require flooring. Good moisture resistance; 3, to facilitate the fall of the pet's hair, the floor surface should be smooth, easy to clean. It seems that solid wood, solid wood composite flooring and the like can not help so pet "toss", it is best to choose to strengthen the floor, bamboo flooring, their surface wear resistance, product stability, easy to handle it, It is the best choice in wooden flooring.

Does the laminate flooring require waxing?

Laminate flooring is not as delicate as solid wood flooring. Its special wear layer on the surface is aluminum trioxide. It is wear-resistant and anti-fouling. The pores between molecules are very small. Waxing cannot be penetrated into it. Instead, it can be regarded as Metal material, "metal" has been relatively bright, and if you apply oil on it, it will naturally feel more slippery and easier to stick stains. So on weekdays, as long as we use non-wet rags and mops to wipe the laminate floor, it is OK. There is no need to do more maintenance on it.

How to use bedding? What effect?

Bedding is a relatively new floor covering material that can replace keel. Suspended paving method is used to directly install on the ground. It is convenient and quick to install and will not damage the floor. Even if you move or recycle it in the future, it can be reused. The material is flexible, and the moisture-proof and heat-insulating capability is strong. Even if the floor has a certain degree of shrinkage due to changes in the climate and the environment, the product will not show obvious warping and crevices.

What is the difference between flat pressure and lateral pressure of bamboo flooring?

Flat pressure and lateral pressure are two production methods of bamboo flooring. When the bamboo strips are assembled in the upward direction, they are flat pressed, and when the mysterious side is combined, they are lateral pressure. Relatively speaking, the lateral pressure is more detailed than the flat pressure. , more trouble, anti-deformation force, stability is also a side-pressure products more savings, so the price will often be more expensive. From the surface, the natural bamboo surface on the surface of the pressed bamboo floor retains obvious natural bamboo, giving people a feeling of naturalness and pastorality, while the bamboo flooring on the side-pressing bamboo flooring is not obvious and the texture is more delicate. Because the characteristics of bamboo flooring itself are good, we just need to choose according to our own preferences, there is no need for too much tangled for the difference between the two.

Is it possible to make a parquet effect with ordinary flooring?

There are generally two types of parquet flooring: one is the splicing of small-size products, and the formation of “mosaic” through the orderliness of many products and paving lines. This requires a higher quality of flooring and stitching techniques. Otherwise, it is easy to have gaps. After the effect is applicable in the size of the space; the other is a large-size mosaic, with different colors, different shapes of the floor combined into a new, repeated flower-shaped pattern, more suitable for large-scale use. The size of the ordinary floor is too large and there is not much change, so it is not suitable for making parquet effect.

Does it take a long time to spread the wood on the balcony?

This is mainly related to the material of the wood itself. Good quality wood preservatives can be used for 20 or 30 years. However, there may be problems such as mildew, cracking, and insects after 2 or 3 years. Moreover, the balcony is often closely linked with the interior space, and it is easy to affect the health of the family after the preparation used to make the wood is volatilized. Xiao Bian think that the best wood on the outside or on the balcony, if you want to make the effect of preservative wood, you can choose a new plastic wood floor, PVC foam flooring, they resemble wood, the material is not wood, so use The risk of worms is lower than that of wood.

Experience talk about space door price paint

Belleville Washer NFE 25-511 L

Widen Belleville Washers,Stainless Steel Widen Belleville Washers,Widen Conical Lock Washers

Ningbo Yinzhou Zhenhua Stamping Co., Ltd. , https://www.zhwashers.com