1. The reason for the sound of empty drums is caused by improper fixation. The main reason is that the number of hair boards and keels, the number of hair boards and floor nails is small or the nails are not firm. Sometimes it is caused by shrinkage of the moisture content of the board or the glue is not qualified. To. Therefore, the process of rigorously testing the moisture content of the board and the quality of the adhesive is particularly important. It can be used only after passing inspection. The nail should not be too small during installation. 2. The main reason for the unevenness of the surface is the unevenness of the grass roots or the deformation of the floor planks. During construction, the level of the keel is leveled with a level ruler, and if it is not, it should be adjusted. Ventilation slots should be made on the keel. A 10 mm ventilation gap should be left on the board margin wall. The insulation material must be dry to prevent the wood from picking up the damp drum. The flatness of the wooden floor surface should be within 1 mm. 3. Reasons for lax seams In addition to the non-standard installation during construction, the large width and dimensional errors of the plates are also important reasons. 4. The main reason for the partial buckling is not only due to the moisture deformation of the board, but also the patchwork seams of the wool board are too small or seamless, and the water leaking from the hoses during use is caused by wet floors. After the floor is covered, the paint on the floor paint should be complete. In daily use, water should be prevented from flowing into the lower part of the floor, and the surface water must be cleaned in time. 5. Environmental protection tools should be used during the cutting process to avoid hazards caused by harmful materials such as sawdust, dust and formaldehyde. Flooring Selection Flooring Solid Wood Flooring Paint Formaldehyde
LEDER technology's strip light is a functional and multi-purpose standard strip family that incorporates premium performance and construction durability. The performance and application versatility of this series of strip light can be increased by incorporating symmetrical or asymmetrical reflectors.
This LED Strip light designed to replace less-efficient fluorescent strip lights in garages, maintenance facilities, workshops, and high-traffic outdoor areas that require commercial-grade durability. This Strip light also delivers a superior light quality utilizing the latest in LED technology designed to perform in the most brutal outdoor conditions.
Features:
•Quality Assurance
• Low light failure and High color rendering
• Low light decline, high brightness, long life
• Full of modern flavor
• Steady electric function, saving the energy and power
• Color temperature :3000k-6000K
• Intelligent constant current IC driver
• Type of protection: IP20 /IP65/IP67/IP68
• Warranty:3 - 5 years
Our LED Strip light can be the illumination solution in commercial, industrial, retail and residential applications. Fixtures can be used in storage / utility areas, coves, display cases, shops, task, and general area lighting.
We have rich production experience in lighting. Except LED High Bay Light, we also offered other product in Indoor Lighting .Such as : LED Downlight , LED Panel Light , Track Light , Linear Light , Indoor Wall Light , LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .
LED Tape Light,Outdoor LED Strip Lights ,LED Light Strips For Room,Waterproof LED Strip Lights JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.walllightoutdoor.com