Lamps play an important role in our lives. How can a room without light have the power to attract us home? For the enthusiasm of the 'temptation to go home', we should take care of it and keep it. The warmth that makes us move. Let's share the tips for lamp maintenance. First, see the instructions After buying the lamp, don't be busy installing it. You should carefully look at the markings of the lamp and read the installation instructions. Then install and use the lamp according to the instructions. Otherwise, danger may occur. Second, problems occur in time to replace According to the light source parameters provided by the sign, replace the aging lamp in time, and find that the two ends of the lamp are red, the lamp is black or there is a black shadow, and the lamp is not bright, the lamp should be replaced in time to prevent the ballast from burning out. Waiting for insecurity. Third, do not change the structure of the luminaire During cleaning and maintenance, care should be taken not to change the structure of the luminaire, and do not replace the parts of the luminaire. After the cleaning and maintenance is finished, the luminaire should be installed as it is, and the parts of the luminaire should not be missed or misplaced. Fourth, do not switch frequently When using the luminaire, try not to switch frequently, because the current through the filament is higher than the current during normal operation, so that the filament temperature rises sharply and accelerates sublimation, which will greatly reduce its service life. Reduce the switch of the luminaire. Fifth, correct maintenance The luminaires must be intensified during use to extend their service life. The lamp of the room should always be wiped with a dry cloth, and pay attention to prevent moisture intrusion, so as to avoid the phenomenon of rust damage or leakage short circuit for a long time; the lamp installed in the toilet and bathroom must be equipped with a moisture-proof lampshade, otherwise the service life will be greatly shortened; Lamps installed in the kitchen should pay special attention to anti-smoke, because the accumulation of grease stains affects the brightness of the lamp; the light-colored lampshade has good transparency, but it is easy to be dusted, so it should be diligently wiped to avoid affecting the penetration of light; If it is non-metallic, wipe it with a damp cloth to avoid dust accumulation and affect the lighting effect. Moisture can cause rust and paint to fall off, and shorten the life of the luminaire. Therefore, moisture protection is the key to lighting maintenance, especially the bathroom, bathroom lamps and kitchen stove lights, should be installed with moisture-proof lampshade to prevent moisture intrusion, to avoid rust damage or leakage short circuit. It is best not to wash the lamps with water. Just wipe them with a dry cloth and wipe them with water. If you accidentally touch the water, wipe them off as much as possible. Do not wipe them with a damp cloth immediately after turning on the lights. Concerned about surprises Tags: lamps, maintenance, tips, lampshades, lighting effects Previous: What brand of shower is good and reliable quality Next: Hardware Encyclopedia: Tool experts teach you to know "knife" Gu10 Led Track Lighting,Gu10/Mr16 Track Light,Led Track Lighting Kit Black FOSHAN CITY KURUI LIGHTING CO.,LTD , https://www.kuruilighting.com