1. The mobile power tool and hand-held power tool should be connected to a protective ground or a protective zero before powering on.

2. Portable power tools and hand-held power tools should be equipped with separate power switches and protections. It is forbidden to connect one switch to two or more than two electric devices.

3. The power switch of the mobile power tool should use the leakage protection device, the operating current should not exceed 15mA , the operating time is less than 0.1s , and the switch should be installed in a place convenient for operation, and the tool distance should not exceed 5m .

4. When the portable power tool and hand-held power tool are connected by a socket, their plugs and sockets should be free from damage, cracks, and good insulation.                                                  

5. When using the mobile power tool to leave the site for a reason to suspend work or if there is a sudden power outage, the power switch should be turned off.

6. Mobile power tools and hand-held power tools should be equipped with high-sensitivity leakage protection devices.

7. The power cords of mobile power tools and hand-held power tools must use copper core multi-strand rubber flexible cable or PVC sheathed flexible cable. The cable should avoid the heat source and must not be dragged to the ground. When the above requirements cannot be met, measures should be taken to prevent heavy objects from crushing the cables.

8. When the mobile power tool and hand-held power tool need to move, do not carry the power cord or the rotating part.

9. After the mobile power tool and hand-held power tool are used, the power must be turned off at the power supply side.

10. When replacing a power tool drill, it must be done after it has stopped.

11. Use hand-held power tools should wear insulated gloves or stand on the insulation table.

Hand-held power tools recommended - light electro-hydraulic multi-purpose pliers

Germany LUKAS light electric hydraulic multi-function pliers

Germany LUKAS latest development of a new generation of AC and DC dual-use electric rescue tools - eDRAULIC second-generation series of electric hydraulic tools, no external power source and tubing, each tool can be operated by a light switch, without considering the power source can drive The number of tools and the reduction of working time are ideal tools for rapid demolition.

For more details, please click the link below the picture.