The plug valve is a fast-opening and straight-through valve. Because the movement between the rotary sealing surfaces has a wiping effect, and when it is fully opened, it can completely prevent contact with the flowing medium, so it can usually be used for medium with suspended particles. Another important feature of it is that it is easy to adapt to the multi-channel structure, so that one valve can obtain three or even four different flow channels. This can simplify the design of the piping system, reduce the amount of valves and some connecting accessories required in the equipment. 3 Way Stopcock,Three Way Stopcocks,Medical 3 Way Stopcock,Disposable Three Way Stopcock Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyue.com
High-pressure gear pump brief introduction
High pressure gear pump is improved on the basis of the original ZYB residue pump, especially for petroleum, chemical, grain and oil, building materials, household chemicals, road construction, power and asphalt mixing station sector and industry fuel Spray occasion. The following brief introduction of high pressure gear pump now! Material: High pressure gear pump main components of the material selection of more high-quality wear-resistant materials, the heat treatment has a high strength and hardness. Structure: High-pressure gear pump in the structure of the use of a number of unique hydraulic balance technology, high-pressure gear pump pump to work at high pressure high efficiency, low noise, stable operation, long dwell time, etc. Unique Features The pump has a gear face Adjustable gap structure, when the high-pressure gear pump working pressure drop appears for some time, through the high-pressure gear pump pump cover the external fine-tuning of the structure of the pump gear end gap to adjust, so that the working pressure of the pump to be restored and Can be adjusted several times. The main purpose: high-pressure gear pump gear pump 5-10 times longer than the average life of our country containing high-pressure fuel combustion of flammable occasions is indeed the first high-pressure gear pump and reach the advanced level of similar products at home and abroad the scope of application and the main purpose of this Pump for conveying medium temperature is not higher than 200 ℃, the viscosity is not greater than the non-metallic impurities containing heavy oil, diesel, coal tar and other types of low-grade low-grade combustion oil, etc. Particularly suitable for petroleum, chemical, grain and oil, building materials, Road construction, power and asphalt mixing station sector and industry fuel injection occasions. High-pressure gear pump is also more suitable for work pressure requirements and long-term continuous work of the occasion. The above is a brief introduction on the material, structure and use of high-pressure gear pump, hoping to have a deeper understanding and understanding of high-pressure gear pump. Further reading: IFAT China Guangzhou exhibition industry leaders building water pump manufacturers ranking article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: lindj (QQ / WeChat:) Starting: http://beng.liuti.cn/ (Service Hotline:)