Surface Mounted Emergency Spotlight Surface Mounted Emergency Spotlight,Ip65 Led Street Light,Suface Mounted Spotlight,Surface Mounted Spotlights Effort Semiconductor Lighting Ltd. , https://www.effortem.com
(A) selecting a current shown in Figure III, press "↑, ↓" keys to move, press the "Enter" key showing four, press the "confirm" key measurements, press "return" current reselection. The measured data is shown in Figure 6. After the data is stable, it will be locked and flashing. Selecting “Continue†will refresh the data and resuming the measurement at the same point. Select “Print†to print out the current data. Select the “Save†item. The current data and date are saved. Pressing the “back†key will discharge the battery as shown in Fig. 7 and beep. When the discharge is complete, the buzzer will stop; reenter the screen 3 and press the “return†key to return to the main menu. 
(B), modify the time as shown in Figure 8, press "â†", "→" key, select the location; press "↑", "↓" key to change the value, press "Confirm" key to modify the system time, press "Back" key will Without modification, return to the main menu. 
(C), modify the temperature in Figure 9, to modify the current ambient temperature, when you do not need temperature conversion do not operate this item, only the temperature has been modified in advance, and then measured, the temperature conversion is effective.
(D), access to data in Figure 10, the data displayed in reverse order of measurement, the final measurement of the data at the top, press "↓" key to scroll down the data, press "↑" key, the data recovery to the top. 
Second, the DC resistance tester printer loading paper (1) Turn off the power, remove the printer cover, use your hands to point inside the active tongue on both sides of the printer, gently pull the printer out of the panel.
(2) Put the paper roll on the paper shaft and push it into the normal position in the direction of the shaft guide.
(3) Turn on the power and press the “SEL†key to turn off the printer indicator. Press the “LF†key again. The machine head starts to move and the paper is fed into the head inlet until the paper head is exposed to a certain length.
(4) Turn off the power, gently place the printer back into the instrument, gently pull the paper out of the printer cover, and close the cover to complete the paper loading.
How to correctly use DC resistance tester to load paper and operation method
DC resistance tester operation method: