ICESUN Vacuum Glass LTD. can provide the customized vacuum glass for freezer. With its superior heat insulation ability, the central condensation temperature of tempered vacuum glass is reduced to below minus 50 degrees. Used in freezers, vacuum glass can save more than 200 dollars of electricity every year, and ICESUN High-tech Vacuum Glass has passed the safety certification of American IGCC and SGCC. Vacuum glass welding edge sealing adopts the patented sealing materials and low temperature welding sealing technology, and the vacuum layer of Safety Vacuum Glass can be maintained for 50 years. The refrigerator door adopts vacuum glass that is a transparent structure as a whole. Through the transparent vacuum glass for freezer, the users can directly observe the condition of the food in the refrigerator without opening the door body, so as to reduce the waste caused by the expiration of the shelf life of the food, decreasing the wasting of resources and protecting the environment.
Vacuum Glass For Freezer,Tempered Glass For Freezer,Tempered Vacuum Glass For Freezers,Low-E Glass For Freezer ICESUN VACUUM GLASS LTD. , https://www.icesunvacuumglass.com
The hard alloy saw blade consists of two parts: a saw blade and a hard alloy saw tooth. Carbide sawtooth is currently basically imported. The alloy granules used in high-quality saw blades are thicker and larger, because such alloy saw teeth can be sharpened several times and have a long service life. The welding quality of hard alloys is also very important. Welds should be thin and uniform, so that the saw teeth can Withstand greater cutting forces.
The quality of the saw blade is very important. Because the saw blade adjusts the rotation, it delivers both cutting forces and job stability. An excellent saw blade not only has static geometry and accuracy, but more importantly, its dynamic characteristics. When the saw blade is cut continuously, the heat generated by the cutting of the alloy sawtooth will be transmitted to the saw blade, which will increase the temperature of the saw blade. In this case, the high-quality saw blade can maintain the accuracy of the position, and the quality of the saw blade is poor. Saw warpage will occur, affecting the sawing accuracy. The dynamic stability of the saw blade is particularly important for the use of several saw blades in a group. 