In actual production, the motor interlock block is locked (input In-tlock = 0). We can click on the Intlock button in the motor view and the view of the interlock block will appear. There is no condition in the temperature of the motor interlock. There is a purple dot on this temperature condition, indicating that the motor is stopped because the temperature is not satisfied. We can judge whether the temperature is not reached or the temperature of the equipment is damaged. Or there is a problem with the device connected to the test temperature, and the problem is solved and solved by one by one. If the equipment is damaged and the site temperature meets the conditions, we need to continue the operation of the motor to eliminate this interlock and let the motor 1 resume operation. Workers can replace damaged equipment in time to handle problems flexibly and quickly in production. Interlock with reset (Protect Protection) and debugging. This interlock is usually associated with some devices that have failed to reset the fault, such as frequency converters, soft starters, and so on. When the interlock is locked, it is necessary to check the respective feedback of the interlocking associated device, so that the associated device can be unlocked after the normal operation confirms the fault. Enter the input value if the interlock is not associated (enter Protect=1). In the Siemens PCS7 system, the field staff is skilled in mastering the operation of the motor block and plays an important role in the production process. Nylon conveyor belts, especially the three interlocks (allow, interlock, protection) in the motor block, allow to represent the starting conditions inside the motor; interlocks represent the starting conditions outside the motor; protection is the need to confirm the error (reset) The motor can only be started afterwards. The flexibility to use the functions of the motor block is the key to solving the problem to ensure that the production goes smoothly. Concerned about surprises Label: Motor Interlock Previous: How to prevent overheating of diesel generator sets in summer Next: How to solve the grinding crack phenomenon caused by surface grinding Pipe Fitting,Butt Welding Tee,Butt Welding Crosses,Stub Ends ZHITONG PIPE VALVE TECHNOLOGY CO.,LTD , https://www.ztpipevalve.com