ceiling fan with LED,ceiling fan with light,ceiling fan lamp,copper motor ceiling fan, remote control ceiling fan JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.jmesclightingfan.com
——The 5th executive director (expansion) meeting of the 6th China Machine Tool Industry Association and the work conference of the Secretary-General was successfully held in Beijing. Under the situation that the whole industry actively implemented the key tasks of the “Twelfth Five-Year†development plan, China Machine Tool Industry Association VI The five executive directors (expansion) meeting and the work conference of the Secretary-General were successfully held in Beijing on October 20 and 21, 2011. More than 180 people attended the meeting from the rotating directors, deputy directors, deputy directors, deputy directors, and representatives of representatives from all over the country. The relevant secretary-generals, deputy secretary-generals and permanent representatives of the association’s permanent branches attended the meeting. The meeting was chaired by the Chairman of the Board of Directors Long Xingyuan and the Chairman of the Board of Directors Huang Zhao. In order to implement the central government's strategic plan of “accelerating economic restructuring and transforming the economic development mode†and the “12th Five-Year Plan for Development of Machine Tool Industryâ€, the theme of this meeting is: implementation of strategic transformation and shift of work focus, promotion The industry has grown from big to strong. The meeting heard the report of Director Zhang Xiangmu of the Department of Equipment Industry of the Ministry of Industry and Information Technology entitled "Accelerating Strategic Transformation and Promoting the Machine Tool Industry from Big to Strong"; listening to the former Director of the State Council Development Research Center, Chen Qingtai, entitled "Industrial Structure Upgrade" The special report of the Policy Thoughts; listened to the keynote report of Executive Vice President Wu Bolin entitled "Implementing Strategic Transformation, Striving to Promote the Industry from Big to Strong"; Hearing the Executive Vice President and Secretary General of Wang Liming Introduction to the economic performance of the industry. The meeting reviewed and approved the key points of the "Working Points during the Twelfth Five-Year Plan Period of the Machine Tool Industry" and the Standing Vice Chairman of Wu Bolin on behalf of the permanent establishment. The personnel appointment and dismissal proposal of the permanent establishment was reviewed and approved, and Comrade Chen Huiren was appointed as the deputy secretary general of the association. Director Zhang Xiangmu believes that the theme of this conference is very good, which is in line with the requirements of the national “Twelfth Five-Year Plan†and the actuality of the machine tool industry. In his report, Director Zhang mainly talked about the situation and tasks faced by the equipment industry and some ideas for the development of the machine tool industry. It introduces the main tasks, development goals and policy orientations of the equipment manufacturing industry during the “Twelfth Five-Year Plan†period, analyzes the global economic situation, and instructs the machine tool industry to seize opportunities, properly respond, seize opportunities, and become stronger in the industry. It has set an example for the equipment manufacturing industry and made greater contributions to national defense technology and key areas. Director Chen Qingtai fully affirmed the "Working Points of the Machine Tool Industry during the Twelfth Five-Year Plan Period" proposed by the Machine Tool Association, and considered it to be an important guiding opinion for the machine tool industry during the "Twelfth Five-Year Plan" period. Chen Qingtai analyzed the comparative advantages of China's industrial development in the special report, and proposed that China has entered the active period of independent innovation. When it was transformed and upgraded, it published its opinions on revitalizing the equipment industry. Director Wang Jianyu of the Department of Equipment and Industry of the Ministry of Industry and Information Technology introduced the situation of major special implementation to the delegates and the new measures and efforts to be taken during the “Twelfth Five-Year Plan†period. Encourage enterprises to actively cooperate with the characteristics of the enterprise according to the overall requirements of the country. Participate in and do a special implementation work. In the theme report of the conference, Wu Bolin, executive vice president, first introduced the major achievements, major problems, basic characteristics and main contradictions of the industry during the 11th Five-Year Plan period, pointing out that the industry is now at a critical turning point. Period, from big to strong is an inevitable choice. After introducing the background of the “Twelfth Five-Year Plan†of the industry and the “Working Points of the Machine Tool Industry during the Twelfth Five-Year Plan†period, it focuses on three landmark goals of the industry from large to strong, namely: at the core of key industries. Breakthrough progress has been made in the provision of equipment and services in the manufacturing sector; the domestic market share of medium and high-end CNC machine tools has increased significantly, and the domestic market share of medium and high-end CNC systems and functional components has increased significantly; a number of world-renowned brands and advantageous enterprises have been formed. It summarizes the three work points to achieve the above objectives, namely: focus on improving the market competitiveness of medium and high-end CNC machine tools; focus on improving the supporting capabilities of high-end CNC systems and functional components; and strive to improve the comprehensive service capabilities for the mid-to-high-end market. In the promotion of core competitiveness, special emphasis is placed on the key elements of quality factors, and it is proposed that the problem of "shape like God is not similar" must be effectively solved. In the development of numerical control systems and functional components, the principle of "two legs" is proposed. The report also elaborated on the main measures to implement the industry's "Twelfth Five-Year" development ideas, and proposed seven points to the industry-wide enterprises, and proposed the direction of the permanent institutions of the association and the recommendations to the government departments. (For details, please refer to the full text of the theme report of this issue.) The theme report was highly recognized by all delegates. Wang Liming Executive Vice President and Secretary General briefed on the industry economic operation situation in the first eight months of this year, focusing on the whole industry. Under the current economic situation, we must pay attention to the problems existing in the industry and take active measures to adjust as soon as possible. Product structure, focus on transformation and upgrading. At the same time, it is pointed out that although the growth rate of industry output in the second half of the year is a slow downward trend, it is cautiously optimistic about the economic forecast for the whole year. It is estimated that the industrial output value of the industry will increase by 18% in 2011. In view of the macroeconomic situation in 2012, after comprehensively analyzing the market situation and development environment that the industry will face next year, it is emphasized that in 2012, the whole industry will face greater challenges, the task will be more arduous, and the economic operation speed will fall back. At the same time, technological innovation and product structure adjustment in the machine tool industry will be further accelerated, and the industrial structure will be gradually upgraded. In the corporate communication, Long Xingyuan, Chairman of Qinchuan Machine Tool Group Co., Ltd., Guan Xiyou, Chairman of Shenyang Machine Tool (Group) Co., Ltd., Jiang Hua, General Manager of Sichuan Pushkin Ningjiang Machine Tool Co., Ltd., and Director of Shandong Bote Precision Co., Ltd. Chang Li Baomin, Zhang Wanmou, Chairman of Yantai Global Machine Tool Accessories Group Co., Ltd., and Wang Shequan, Deputy General Manager of Zhuzhou Diamond Cutting Tools Co., Ltd., spoke on behalf of the company. Zhang Zhigang, chairman of Jinan Second Machine Tool Group Co., Ltd., made a written exchange. Finally, Executive Vice President Wu Bolin made a summary of the meeting. The meeting held that under the guidance of relevant government departments, after the full implementation of the "Working Tools Tool Industry" during the 12th Five-Year Plan period (Trial), accurately analyzed and grasped the status quo of the machine tool industry and the competitive situation at home and abroad, timely proposed The shift of development strategy and the shift of work focus should be used as a work guide for industry development during the 12th Five-Year Plan period. The meeting pointed out that through the long-term unremitting efforts of industry enterprises, the machine tool industry has achieved a historic transformation from small to large. The strategic goal of becoming bigger and stronger is at the right time. It is an inevitable choice based on the basic characteristics, major contradictions and market trends in the current analysis of the industry. The three landmark targets closely follow the key needs of the national economic development and cut the industry reality. The realization of these three goals will promote China's machine tool industry to take a solid step in the process of becoming bigger and stronger, and lay a solid foundation for the ultimate goal of becoming a machine tool. The conference called for the whole industry to actively carry out the following aspects with the guidance of the "Working Points of the Machine Tool Industry during the Twelfth Five-Year Plan Period". First, in accordance with the transformation of development methods, to achieve the focus of work shifts, adjust the development strategy of enterprises, select the positioning, long-term adherence, make characteristics and brands. The second is to innovate the market development model and management mechanism, overcome the difficulties of deep-level technology and industrialization technology, and strive to improve the competitiveness of the middle and high-end market. The third is to strengthen the technological innovation system and the construction of a talent team with enterprises as the mainstay, and provide support and guarantee for the realization of the industry from “big to strongâ€. The meeting requested that the permanent establishments of the association and the branches should strive to take the lead in realizing the shift of their work priorities, focusing on the three key tasks, fully coordinating various resources inside and outside the industry, and playing their due role in the process of achieving the three landmark goals in the industry. effect. It is necessary to actively organize supply and demand exchange activities between major users in key service areas and machine tool manufacturing enterprises to help enterprises overcome the mid-to-high-end market. It is necessary to actively organize industry experts to study and solve hot issues in the process from large to strong, and provide policy advice to the government in a timely manner to provide solutions for enterprises. All kinds of business work should focus on the service center for the industry to change from strong to strong, carry out work innovation, actively do a good job in the major science and technology projects entrusted by relevant government departments, and fully serve the industry's "Twelfth Five-Year" development goals. The meeting stressed that in the process of organizing the implementation of the "Twelfth Five-Year Plan" period and achieving three landmark goals, industry associations and enterprises should strengthen their reporting and communication with the government and strive for more guidance and support. By concentrating all aspects of energy and resources, we will coordinate actions and jointly promote the industry from large to strong. This meeting is the first executive director (expansion) meeting after entering the "Twelfth Five-Year Plan". The meeting proposed to change the development strategy, shift the focus of work, and achieve the goal of becoming stronger and stronger in the industry, marking the development of the industry into a new history. stage. The meeting firmly believes that after the joint efforts of the whole industry during the "Twelfth Five-Year Plan" period, it will surely take a solid step on the road from big to strong. Finally, Wu Bolin said that in the process of research, drafting and revision of the "Working Points of the Machine Tool Industry during the Twelfth Five-Year Plan Period", it was supported by a large number of industry enterprises; it was obtained by the National Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Commerce, and the National Energy. Bureau, National Defense Science and Technology Bureau, Xinhua News Agency, especially the assistance and guidance of the leaders of the Equipment Industry Department of the Ministry of Industry and Information Technology; He Guangyuan, Chen Qingtai, Shen Liechu, Lu Yanqi, Xu Xingchu, Cai Weici, Cheng Zhusheng, etc. who have long been concerned about supporting the development of the machine tool industry Thanks to the help and guidance of the old leaders, I would like to express my heartfelt thanks! In the tense and warm atmosphere, the fifth meeting of the sixth executive director of the China Machine Tool Industry Association came to a successful conclusion. The Secretary-General’s working meeting was then held on the 21st. Nearly 50 people, including the secretary-general, deputy secretary-general and staff of the permanent establishments of the associations, attended the meeting. The meeting was chaired by Executive Vice President Yan Liang and Executive Vice President and Secretary General of Wang Liming. The meeting heard the report on the completion of the key tasks and tasks of the association and the opinions on strengthening the construction of the club. He listened to the interpretation of the "points of work" by Deputy Secretary-General Chen Huiren and the implementation of the spirit of the meeting. The idea of ​​industry work; listened to the explanations made by Director Jiang Jianming of the Finance Department of the Association to strengthen the financial management opinions of the club assets; and listened to the briefing on the preparation of the CCMT2012 exhibition by Deputy Secretary-General Li Jingming. This is an important working meeting for actively implementing the spirit of the five-time executive director (expansion) meeting of the Sixth Session. During the discussion stage of the meeting, the Secretary-General and the Deputy Secretary-General expressed their opinions on the five-time executive director (expansion) meeting and the "Working Points of the Machine Tool Industry during the Twelfth Five-Year Plan Period". They all said that the meeting was held very timely. Industry work is very important, indicating the way forward for industry companies. He also said that he must promptly convey and implement the spirit of the meeting to all member companies, unify his thinking as soon as possible, change the development strategy, shift the focus of work, and fully implement the three iconic goals of the machine tool industry, and realize the industry's ultimate realization from large to strong. The transformation has laid a solid foundation.