LED Grow Lights function by sending an electric current through a semiconductor material.This in turn excites the electrons that create a powerful light from a very small bulb.By using different materials for the semiconductor, it is possible to create LED diodes with different wavelengths of light. This makes them capable of giving your indoor plants exactly what they need for each stage of growth. How those are used will be covered further down.
Full spectrum Grow Lights 600W/900W/1200W/1500W/1800W/2000W Double Chips LED Grow Lights Indoor Plants lamp for flowering and growing.
Item Display
Advtanges:
Upgraded Epistar chips,High Lumen,High penetration.
Plug with listed certificate safe to use.
The Plug you can choose
Quality Control systems
Package
Our professional full spectrum Grow Light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Cautions:
1.Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture
2. The working environment for the light is -20~40 degree celsius,45%RH~90%RH.
3. To protect the light, Plz cut off the power when there is a lightning strike.
4. Don`t touch or move when the light working.
Suggestions:
1.Clean the dust inside every 6 months to ensure the good heat dissipation and long life time.
2.Don`t keep too short distance to the plant canopy to avert leaves bleaching.
3. Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hang too high.
4. While taking care of the plants, please spray the leaves and branches 2-3 times everyday, to ensure the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
Our Company
Warmly welcome to take a visit on our factory at any time and Philizon Fulll Spectrum Grow Lights are perfect for green house applications.
Full Spectrum Grow Light,High Lighting Effect Led Grow Light,High Lighting Effect Grow Light Led,High Lighting Effect Grow Light Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumgrowlight.com
Infrared camera spot array infrared lamps use a special "wafer structure", "crystal growth process", "encapsulation technology", and the infrared camera's infrared lamp brightness standard is completely different. When the infrared camera was just born, in order to identify and monitor the distance 50 meters away, it would take 60 24-mil infrared lamps to achieve this. Due to the large size, high power consumption, and low heat dissipation, the lamp has a lifetime of less than one year. After the infrared camera adopts the second generation array infrared lamp, it is still 60 pieces of 24 MIL, the volume is reduced several times, the heat-dissipating ability is improved effectively, and the life span is extended by 5 to 10 times. Now infrared cameras use the third generation of dot-matrix infrared lamps, you only need a 42mil to get it, smaller size, longer life, and extend the recognition distance to 80 meters. The reason that a spot-array infrared lamp can illuminate such a long distance just because of an infrared lamp is mainly because of its extremely high photoelectric conversion efficiency. Because of this, the products assembled using this chip have extremely low heat and long life.
(2) The intensity of the infrared infrared light beam of the infrared camera is no longer based on power.
Infrared camera generation of LED infrared light, second-generation array of infrared light, people often use infrared chip points to distinguish between the strength of the infrared light, brightness and darkness. Since the conventional light-emitting chips have different sizes and powers, infrared lamps with large natural power have high brightness and a long irradiation distance. In addition, if you use this method to distinguish the infrared camera's infrared lamp is good or bad, you need the photoelectric conversion efficiency of the infrared lamp. The photoelectric conversion efficiency is different. It is difficult to assess the quality of the infrared lamp simply based on the infrared lamp power parameters of the infrared camera. After the introduction of the dot-matrix infrared lamp, this situation has been completely changed. People can completely disassociate themselves from the infrared lamp power evaluation method and distinguish the intensity, brightness and darkness of the infrared lamp through the optical output (mW).
People use the infrared camera infrared chip points to distinguish the intensity of the infrared light, light and dark. After that, due to the different sizes of the chips and the power is different, the input power is used to distinguish between the strength and the intensity of the infrared lamp. However, the input power to distinguish between bright and dark, the chip's "equivalent luminous efficiency is the premise. In the past, it is true that the luminous efficiency of each brand of chips is slightly the same, so that the comparison of light and dark methods is not controversial, but After the introduction of the company's newly introduced high-efficiency infrared chip, people will only be able to distinguish the intensity of the infrared lamp by its optical output (mW), and the brightness of the infrared lamp will be different from that of the infrared lamp. After the crystal method to the thermoelectric separation packaging technology, our light-emitting components are greatly superior to the traditional infrared light-emitting LED, and also break through the "light-emitting efficiency" that we have identified for a long time, thereby reducing heat generation. In this way, under the same brightness, In addition to low power consumption, the heat sink required for less heat is smaller, and the overall product volume can be made smaller. More importantly, because the temperature is not high, it is also harmful to other electronic components around it. This is not one of the advantages of the dot matrix infrared camera.
Infrared light features of a new generation infrared camera
(1) The infrared laser beam irradiation distance of the infrared camera is independent of the number of wafers.
Zener Diode protection Each LED,one LED Out,other LEDs still work.
High quality material,Listed Certification Wires,Heatproof Tube,Zero-Risk to catch fire.
Efficient Full spectrum Special rations of Blue,Red and White for both blooming &fruiting stages.
Adopting isolated power supply,safe&easy to maintain&long life time.
Aluminum heat-conducting plate+high quality brand fans,efficient heat dissipation.
IR LED involved,it is not as bright as other leds,But promote the yield.