Aluminum Awning Windows,Double Aluminum Awning Windows,Metal Awning Above Window,Aluminum Awning Window Parts Guangdong ODICK Intelligent Home Technology Co., Ltd , https://www.odickgroup.com
Where is plate furniture expensive?
The first is design, the second is material, and the third is processing.
Regardless of the design, panel furniture also has the advantages and disadvantages of materials . If 100% beech wood shavings are pressed into artificial boards and formaldehyde-free glue is used for bonding, then the cost cannot be low. In addition, man-made board is to decompose the wooden board into wood chips or wooden paddles, and then re-make the board, so when the temperature and humidity changes greatly, the " deformation " of the board furniture is much smaller than that of the solid wood furniture. Naturally, the equipment required for such a production process is also expensive.
What is the price difference between the " refuse sample " and the " original version " ?
" Barge " is much cheaper than " original " . Its main method is to use wood veneer paper veneer to pretend to be veneer. After one or two years of use, the paper veneer will crack.
There is also the use of hardware. The combination of disassembly and assembly is the biggest advantage of panel furniture, so the quality of the connecting parts is closely related to the quality of the entire furniture. " Original " furniture is expensive in these details.
Related Links
Shopping tips
It is difficult to distinguish whether the panel furniture is made of paper or wood. The easiest way is to observe the pattern, the wood veneer has natural knots, color differences and texture changes.
Edge sealing of panel furniture is very important. Pay attention to the advantages and disadvantages of the edge banding material, and pay attention to whether the edge banding is uneven or warped. Of particular note is that it is not all six sides Edge --- While using a formaldehyde-free adhesives, wood-based panels but there will be more or less volatile gases in the production process, strict Edge of Environmental protection in the living room is of course beneficial.
It also depends on the firmness of the furniture structure. First, the furniture door, drawer --- slit gap If the gap is large, rough explanation, a long time will deformation; the second is a single or double pack boxes Boxes --- Typically, in addition to the plate than the outside layer There should also be a layer of panels inside the furniture. This is called a double box. The furniture of the double box is beautiful and strong.
Of course, the quality of the paint also matters. Are there any streaks in the paint? Is the corner paint too thick? Are there cracks or bubbles? These are to be checked carefully. I had to ask the salesperson if the furniture had been painted a few times. Of course, the more times you get, the better. For more furniture information , go to http://news.gojiaju.com/