Sealand is a trustworthy manufacturer of Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter.
Site Selection for Mass Flow Meter Installation Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com
Second, the total output of cemented carbide and the total shipment of cemented carbide tools compared with the same period last year growth / decline comparison (monthly statistics) 
Third, the main material consumption of cemented carbide tools 
Fourth, the production and shipment of cemented carbide tools 
V. Import and export of cemented carbide tools 
With *data slightly modified (compiled from JCCTMA "April 26, statistic ã‚’ update ã—ã¾ã—ãŸ"; China superhard material network translation: Wang Xian)
a) Sensor stays away from mechanical vibration source, for example, pump. Use flexible pipe to connect meter with pipeline if inevitable. The housing of meter must be standalone, out of touch with any other device. There must be 3 times the size of sensor between 2 sensors if there are many flow meters on the same pipeline, to avoid resonance.
b) Do not install sensor on pipeline that easily expands with hot and contracts with cold, especially near expansion joint, which leads to a worse stability.
c) Sensor stays away from industrial electromagnetic field, such as large generator and transformer, better 5m at least. Such device influences the performance of drive coil and pickoffs. Make sure magnetic field intensity less than 400A/m.
d) Sensor shall be installed on lower pipeline, to be easily full of fluid.
e) Make sure Ex-mark meet application requirements if in hazardous area.
f) Build a sunshade if the meter is under direct solar radiation. g) Keep the meter from corrosive liquid.
Japanese cemented carbide market analysis
Abstract 1. Total output of cemented carbide and total shipments of cemented carbide tools (annual statistics) II. Total output of cemented carbide and total shipments of cemented carbide tools compared with the growth/decrease of the same period of last year (monthly statistics) III. Hard The main material consumption of the alloy tool is four, the production of cemented carbide tools,...
I. Total output of cemented carbide and total shipments of cemented carbide tools (annual statistics)