When you take home a beautiful set of bedding, when you sigh the room and become warm, don't forget the problem of washing and maintenance. If the washing and maintenance methods are not correct, it may cause some trouble. Let's take a look at the tips from experts! Maintenance of wedding bedding 1. Before the first use, it can be rinsed once in water. It can wash off the surface of the pulp and printing and dyeing. It will be softer to use and will not fade easily in the future. 2, please clean before collection, thoroughly dry, folded neatly, and put a certain amount of mothballs (can not be in direct contact with the product), should be placed in the dark, low humidity, well ventilated place. 3. The products that have not been used for a long time can be dried in the sun before being reused, so that they can be restored to fluffy. Wedding bedding cleaning 1. Pour the neutral detergent into the water of the washing machine first. The water temperature should not exceed 30 °C. After the detergent is completely dissolved, put it into the bedding. Do not soak for too long. Unnecessary fading can be caused by the use of alkaline detergents or when the water temperature is too high or the detergent is not dissolved or soaked for an extended period of time. 2. Light-colored products should be washed separately from dark products during cleaning to avoid staining each other. 3. After cleaning, dry in the outdoor ventilation. If you want to use the dryer, please use low temperature drying, the temperature should not exceed 35 °C. You can avoid it from shrinking excessively. 4, should carefully read the washing instructions of the product before cleaning, the products with decorative accessories must pay attention to remove the lace, sinkers, etc. before washing to avoid damage.
Access control system is focus on access keypad, access control power supply, and terminal sensor combine. It's more professional region compare to commercial products and most is for security service provider. MPI helps those service provider build their system for more than 20 years, start from OEM for keypad/power supply, right nowe MPI had own our ability to design and build security/access control system power supply. We have experienced engineer who can design the power supply that can pass UL 294/603 test for access control, and right now MPI is the supplier for world-famous security system provider like Nortek and Allegion.
MPI have two division, electronics design & assembly house and metal stamping & CNC chop.We can provide OEM Sheet Metal Stamping Service.OEM CNC Machining Service.ODM Power Electronics Design and Assembly.ODM LED Driver.ODM Security AC/DC Power Supply.ODM Access Control Power Supply and so on.
Access Control,Access Control System,Access Control Solutions,Commercial Access Control Systems Master Prosperous Industrial Co.Ltd. , https://www.mpigroup-taiwan.com