New house acceptance notice six points

<

The first porter to see if the lock bolt and nose alignment, key rotation is convenient. The gap between the door and the door frame should be moderate, and the smallness should be too tight. Also pay attention to the gap between the door and the ground, and reserve the gap for ground decoration. Otherwise, the door will open and close freely when it is on the concrete floor. After laying bricks or carpets, it will be hard.

The second window window to see fear seepage, the rain, the rain was streaming down the Chuang Feng everywhere. If the developer agrees that you are testing the exterior wall with a water pipe for 10 minutes or more, of course, look at the window's craftsmanship, make sure that the seams are tight and the pressure is not even.

The third tank to see if seepage water closet, prone to rust. The water tank should be energy-efficient because it is not impossible for the water price to continue to rise. The place where the most waste water from the building is caused by flushing the toilet.

Look fourth floor drain look may wish to put some water in the bathroom.

See fifth switch cabinet door cabinet to see if convenient, but also opened the door to see, whether the channel is smooth kitchen cabinets height is easy to deposit the article.

The sixth stainless steel wash basin to see some buildings using a stainless steel wash basin, such as leaking pipes under the basin, the naked eye is not easy to see, you can hand down the pipe to touch it, dry it, you can also light hand touch hose Surface water seepage.

Carpet Window Switch Stainless Steel Toilet Cement Cabinet Door Stainless Steel Cabinet Cabinet Door Kitchen Cabinet Door Bathroom Wash Basin Bathroom Door Bathroom Leakage

Microcentrifuge Tube

High-performance microcentrifuge tubes, optimized design, and high-performance quality help protect your samples. Microcentrifuge tubes are made of polypropylene (PP) and are highly mechanically stable, ensuring your samples are stored, run and centrifuged worry-free.

Microcentrifuge tubes have a maximum centrifugation tolerance of 25,000 x g and are autoclavable (20 minutes, 121°C). The centrifuge tube adopts a snap-on tube cover design, which can be operated with one hand and has good sealing performance, which can effectively prevent liquid leakage; the tube wall is smooth, and the tube body is designed with a frosted area for convenient marking.






microcentrifuge tube sizes,microcentrifuge tubes 1.5 ml,microcentrifuge tubes uses

Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yongyue-tube.com