As the vacuum pressure increases, the material enters the piston cylinder from the small hole on the two sides of the hopper through the hopper to realize the suction action. After the full suction, the material is squeezed and the ejector is closed. The small ball at the mouth of the mouth realizes the action of opening the outlet on the pouring device. As the piston rod moves downward, the small hole on the two sides of the casting device (ie, the discharge port of the hopper) is blocked, and the piston cylinder and the hopper are not connected, and the cylinder body is in the cylinder body. The material can flow out from the periphery of the ball through the lower outlet of the pouring device to complete the quantitative extrusion process. The function of the spring is to prevent the piston from moving downward when the piston moves downward to ensure the smooth extrusion of the material. For one-way closure purposes. The variation of the molding structure changes the switch control action of the rotary valve into a spring ten float control action. In addition to its compact structure, it also creates conditions for reducing the number of motion actions and reducing the complexity of the transmission system. The design principle of the pouring sandwich spring float forming mechanism is to meet the people's demand for novel foods, especially the double-stuffing and multi-puffed foods, and at the same time taking into account the food requirements of people who prefer soft materials. Based on analysis, reference and reference, a new design principle method of sandwich casting structure was designed. The basis of the design is based on the soft material to be easily adhered, and must be casted to absorb the parallel sandwich extrusion output of the two cylinders in the twin-screw sandwich extrusion molding (ie, the outer casing is filled with the filling to form a sandwich), and the three-cylinder is connected in parallel. The output structure can wrap two different inner fillings, and the spring floating ball molding type casting structure is also applied to this, and at the same time introduces the limit block control principle of the limit switch of the circuit control to realize the squeeze and the material. Through the action arrangement, the three design ideas are combined and combined to design the pouring spring float double sandwich forming mechanism.
A Basin Faucet (also spigot or tap: see usage variations) is a valve controlling the release of a liquid that enabling washing and drying in the bathroom.
Basin Faucet,Minimalist Basin Faucet,Basin Faucet For Bathroom,Wall Mounted Mixer Basin Faucets Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jmjenorsanitary.com