Flange Globe Valve,Globe Valve Flange,Forged Flange Globe Valve,Api Flange Globe Valve Wenzhou KAIZHENG Valve Technology Co.,LTD. , https://www.kazevvalve.com
RY80-50-250 main components of the thermal oil pump material
RYRY80-50-250 thermal oil pump structure is reasonable, excellent performance, reliable use. Suitable for conveying high temperature liquids without solid particles. RY thermal conductivity of oil pump corrosion resistance and temperature depends on the material in contact with the main parts of the material (divided into three categories: 1.HT200; II.ZG230-450; III.1Cr18Ni9Ti, OCr18Ni12-Mo2Ti) Features and Benefits RY80-50- 250 thermal conductivity oil pump has advanced technology, high efficiency, long-term stable operation in the hot state no leakage, no additional cooling system, the use of safe and reliable, and other features in our heating medium heating system has been widely used, has entered the petroleum and chemical RY series of air-cooled high-temperature heat transfer oil pump is mainly used for conveying weakly corrosive high-temperature liquid without solid particles, the use of temperature ≤ 370 ℃, is a The ideal circulation pump. The thermal oil pump widely used in high temperature paper lunch box stereotypes, dynamic vulcanized tire and reclaimed rubber machinery, flat vulcanization, rubber, drying, feed drying, printing and dyeing, chemical industry, plywood production, waterproofing membrane production, asphalt heating, noodle drying industry. (1) The RY80-50-250 heat-conducting oil pump is a second-generation product developed on the basis of digestion and absorption of foreign oil pumps. The basic structure of the heat-conducting oil pump is a single-stage single-suction cantilever foot support structure. The hot oil pump is axially sucked in and the outlet is The center is vertical upward, and the motor is mounted on the base. (2) RY80-50-250 heat pump support the use of double-ended ball bearing structure, the front end with lubricating oil lubrication, the rear end with grease lubrication, the middle of a guide tube, to observe the sealing at any time and the recovery of heat oil. (3) The RY80-50-250 heat-conducting oil pump adopts a self-heating and heat-dissipating structure, which changes the traditional water-cooling structure, which makes the structure simple, small in size, saves operating costs, has good performance and is reliable in use. (4) RY80-50-250 thermal oil pump with packing seal and mechanical seal in the form of combination, packing seal with high temperature filler, with good thermal adaptability, and mechanical seal is the use of high mechanical strength, good wear resistance The cemented carbide material, to ensure the sealing performance under high temperature conditions. (5) RY80-50-250 heat-conducting oil pump uses the third generation of polytetrafluoroethylene (referred to as PTFE) lip seal, the sealing performance has been a leap forward than the rubber seal reliability increased by 25 times, extremely corrosion resistance.