Saving electricity tips: First, air conditioning, air conditioner 1. Each 1°C increase in the air-conditioning set temperature can save 6%, and the temperature should be set at 26~28°C. If the window is opened in the east-west direction, blinds or curtains should be installed to reduce the solar radiant heat entering the room and reduce the electricity consumption of the cold air. 2, 5 to 10 minutes before the air-conditioning is deactivated, the temperature setting can be adjusted first, and the air supply can be saved. 3. Avoid using equipment with high heat load in the air-conditioned room, such as iron, hot pot, cooking utensils, etc. 4. Doors and windows should be closed during cold air operation to minimize the number of entrances and exits; for open shops, air curtains should be installed at the entrance to reduce air leakage, so as to avoid increasing power consumption. 5, the use of electric fan in the air-conditioned room can make the indoor air-conditioning distribution more uniform, can achieve the same comfort without lowering the set temperature, and can reduce the power consumption of the air-conditioner. 6. When purchasing air conditioners, you should try to choose an air conditioner with a lower energy efficiency label. The energy efficiency label is about 36% lower than the level 5 air conditioner. 7. During the installation process, the air conditioner should be installed in a position away from direct sunlight. If it is necessary to install it, it is best to install a sunshade (device) on the air conditioner to improve the operating efficiency of the air conditioner. Second, the refrigerator 1. Food should be cooled and cooled before being placed in the refrigerator to avoid wasting cold energy. 2, the refrigerator should not be filled with food, the storage volume is equal to eight points, so as not to hinder the cold air flow, to avoid overload. 3. Reduce the number of door opening. Every time the refrigerator door is opened, the compressor needs to run for ten minutes to recover the low temperature. 4. The refrigerator door should always be kept closed. Third, lighting fixtures 1. Use a fluorescent tube with an "energy-saving stamp". 2, the use of energy-saving lamps (bubble), more than 60% than traditional incandescent lamps. 3. The electronic ballast can be used to save 30% compared with the traditional ballast. 4. It is the best choice for high-frequency three-wavelength fluorescent tubes that are used with electronic ballasts and have high luminous efficiency and high color rendering. 5, 40W single tube fluorescent lamp (including ballast) is more than 30% more efficient than 20W double tube fluorescent lamp. Fourth, television 1. The TV should be placed at least 10 cm away from the wall to facilitate heat dissipation. 2. The power consumption indicated in the general manual refers to the maximum value of volume and brightness. The power consumed during normal use is about 70% of the above. If the volume and brightness are increased, it is relatively power-hungry. . 3, the TV should avoid raising the brightness of the screen, which can save power. 4. Use the video output terminal of the player to connect to the TV image input terminal, in addition to improving the picture quality, and reduce power consumption. 5, to avoid watching TV for a long time, because the TV temperature is higher than the power consumption. 6. If you don't watch TV for a long time, you should unplug the power plug. The TV in front of the bed can set the sleep timer switch. Electric Scissors,Handheld Electric Scissors,Portable Electric Scissors,Cordless Electric Battery Scissors Dtmade Manufacturing Co., LTD , https://www.dtmade.com