One stop snake chandeliers solution for project,snake chandelier lighting design,snake chandelier lighting solution,snake chandelier production,snake chandelier shipping,snakechandelier installation guidance.
More than 2000sqm showroom and 20000sqm factory,athorited by SGS BV TUV and Intertek
Snake Chandeliers,linear chandelier,hall chandelier GUANGDONG LAVIUS LIGHTING CO., LTD. , https://www.laviuslighting.com
Free design and drawing for Hallway Chandelier
Self-priming magnetic pump principle of operation
Self-priming magnetic pump adopts external mixed axial backwater pump body structure, the pump body consists of suction chamber, liquid storage chamber, volute, backflow hole, gas-liquid separation chamber and other components. The key components of the magnetic actuator consists of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation cover. When the motor drives the outer magnet rotor to rotate, the magnetic field can penetrate the air gap and the non-magnetic substance to drive the inner magnet rotor connected with the impeller to rotate synchronously to realize the powerless contact transmission and transform the dynamic seal into the static seal. As the pump shaft, the inner rotor is completely closed by the pump body and the isolation sleeve, thus completely solving the problems of running, running, dripping and leakage, and eliminating the leakage of flammable, explosive, toxic and harmful media through the pump seal in the refining and chemical industry Of the security risks, effectively guarantee the physical and mental health and safety of workers. The following is a small series to share with you self-priming magnetic pump working principle. Self-priming magnetic pump principle describes the working principle of self-priming magnetic pump: the n pairs of magnets (n is even) according to the law arranged in the magnetic clutch on the inner and outer rotor, the magnet part of each other to form a complete lotus root The magnetic system. When the inner and outer two poles are in opposite polarities, that is, the displacement angle between the two poles is Φ = 0, the magnetic energy of the magnetic system is the lowest. When the poles rotate to the same poles, that is, the displacement angle Φ = 2π / n, the magnetic system at this time the maximum magnetic energy. After removing the external force, due to the mutual exclusion of the magnetic poles of the magnetic system, the magnetic force will restore the magnet to the state with the lowest magnetic energy. So the magnet produces the movement, drives the magnetism rotor to rotate. Further reading: industry leaders IFAT China Guangzhou Exhibition building water pump manufacturers ranking article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: gogoing (QQ / WeChat:) Starting: http://beng.liuti.cn/ (Service Hotline:)