Explain in detail the operation, use, precautions and maintenance of the corner-pressing tile machine, let you further understand, use the angle-pressure tile machine to create higher efficiency and generate greater profits.
Urinal Flush Valve
Corner equipment features:
The entire unit automation control system uses a highly integrated network to make the automation system perform better.
Chenghao Color Steel Knitting Machine also has the advantages of operation, maintenance, maintenance, mechanical debugging, and easy mold replacement.
Chenghao color steel plate equipment adopts high-level automatic control software to realize production information management;
Chenghaojiao pressure tile machine adopts Taiwan Delta DVP14ES host computer, which uses the electronic control system of text screen display, which is easy to operate and easy to use.
Color steel tile full steel structure plant frame, single-sided color steel plate steel structure workshop, multi-span steel structure workshop, wood driving beam factory building, villa-type color steel plate room with cross-color steel plate canopy, roof top layer, large span factory building, Light steel structure ring shed.
Chenghao Kok Chi 760 820 820/760 type angular pressure tile machine parameters and use method Kwong Chi 760 820 820/760 type angular pressure tile machine 760 type angular kneading machine) is to update the traditional roof molding machine products, the machine Mainly consists of loading rack, loading rack support, feeding introduction platform, molding host, forming shearing device, hydraulic station, computer control box and so on.
The various concealed roof panels produced by Chenghaojiao Pressure Tile Machine solve the problem of roof leakage in the conventional series. The 760 pressure plate connection breaks the convention of connecting the traditional roof with a screw gun. The installation method uses a 45-degree mesh occlusion. Installation makes the roof waterproof better.
2 considerations
Please start the motor idle and observe if it is normal.
Place the machine at the junction of the two plates and adjust the height of the legs on both sides, paying attention to whether the roller is in the position to be pressed.
Under normal circumstances, the bending width of the platen is between 11 and 15 mm, otherwise the machine is easy to take off.
It must be ensured that the junction of the two plates can be tightly fastened together and cannot be disengaged, otherwise the machine can be easily detached.
When the machine is started, the user must follow the machine to move. If the front two boards are disengaged, the machine must be stopped and the board should be flattened and then turned on.
Since the Chenghaojiao pressure tile machine is formed once, the resistance during the plate pressing process is large. In order to ensure the service life of the motor, please stop for 5 minutes every 30 minutes.
Be careful not to scratch the roller during use and handling. Do not use a blunt instrument to strike the roller.
When not in use for a long time, all parts must be lubricated with oil and covered to prevent water leakage.
3 processing methods
In the production process, it is inevitable that there will be such problems in the production process. The most common problem is the deviation of the color steel plate. Once the deviation occurs, it will affect the production efficiency of the machine and the product qualification rate. Therefore, we must We must know how to correct these mistakes. After a long period of research and exploration, we have made a good way to adjust this problem: if the equipment board runs to the right, it needs to be ironed to the left corner. Or flatten the roller on the right side, the first few axes will flatten the first axis, and the upper roller should be consistent with the lower roller. If it is flattened, the bottom should also be flattened, evenly symmetrical. The roller cannot be changed. If it still doesn't work, first adjust the four corners of the front and rear rows of the color steel tile presser from the big frame to the height of the upper end of the shaft, and then find a line from the first row to the last row. Straighten, check if the lower shaft is on a horizontal line, and adjust the left and right sides of the lower shaft to level. Find the symmetry point in the first row and the last row of the color steel tile equipment, then fasten the locks on both sides, pull a straight line in front of and behind the center of the middle runner, and adjust the gap between the upper and lower shafts. The machine can be adjusted in a straight line. In fact, the remedy for the deviation of the board is that we need to produce and test it for a long time. Different directions of reversal have different remedies, but one thing to note is that both the mechanical roller and other parts need to be aligned on both sides, only two sides. Alignment can maintain symmetry, and the shape of the product will be regular.
4 operation skills
The importance of the tile pressor is not to be known. Today, the good pressure tile machine will give a simple explanation of the operation mode of one of the corner press brake machines. First of all, we must first understand that the "corner-pressing tile machine" is a single-roll forming unit consisting of a variety of pressure-pressing strips that can be produced by a roll. The main components of Chenghaojiao pressure tile machine include: passive loading frame, punching device, leveling device, hydraulic station, computer control system and cutting device after forming. And because the automated device is used on the flying saw punching device, it is also very simple in operation. Secondly, the Chenghaojiao pressure tile machine is a wet process for the production of glazed tiles. Therefore, when cutting, the vacuum extrusion mechanism is often used to accurately shape the village tile. However, this type of tile press also has some bad features, such as the suspension structure of the connecting rod is complicated, the parts are large, the cost is high, and the assembly takes time, etc., but when the tile press is working, its requirements are non-independently suspended. The frame has good durability and can keep the connecting rod from deformation and displacement. Finally, the Chenghaojiao pressure tile machine is a highly efficient economical profile, so it can make the shape of the section more reasonable, so that the processed steel can exert higher performance and thus improve its carrying capacity. It is different from the ordinary I-type type of tile press. It is a widening of the H-shaped steel wing show, so it is parallel on both the inner surface and the outer surface, which is convenient for many high-strength screws and The connection of other components makes the size of the components more reasonable and complete, allowing workers to have more choices when processing.
Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Urinal flush valve is made of brass, chrome plated. Press down for water, delay time 6 to 8 seconds, then automatic closed. It often use for hung Urinal in public washroom. Exposed type flush valve looks simple, easy to install and operate. Working pressure should be 0.05MPa to 0.9MPa.
Exposed Urinal Flush Valve,Concealed Urinal Flush Valve,Automatic Urinal Flush Valve,Urinal Flushing System
SHENZHEN KING OF SUN INDUSTRY CO.,LTD , https://www.handybasinfaucet.com