Love cabinets Faraday cabinets

A look at the edge of the sheet

The cabinets of the high-quality cabinets are exquisitely sealed, smooth, and feel good. The sealing lines are straight and smooth, and the joints are fine. Professional manufacturers use a straight edge banding machine to complete the sealing, decapitation, trimming, chamfering, polishing and other processes in one go. The coating is even and the pressure of the sealing edge is stable to ensure the most accurate size. The workshop-style small factory uses a brush coating, manual pressure sealing edge, with a guillotine knife trimming, polishing with a manual polishing machine, due to uneven pressure, many places are not strong, but also cause formaldehyde and other toxic gases to evaporate in the air.

Second see the hole

Today's panel furniture is assembled with three-in-one connectors. The fit and accuracy of the hole position will affect the structural integrity of the cabinet cabinet. Professional manufacturers use multiple rows of drills to complete a number of holes on a board edge and board surface at a time. These holes are all a positioning reference, and the dimensional accuracy is guaranteed.

Three to see the board

Panels are the first step in the production of cabinets. The large-scale specialized enterprises use electronic cutting saws to input the processing dimensions through the computer, and the computer controls the dimensional accuracy of the material selection, and can process several sheets at a time. The performance of the equipment is stable and the precision of the panel size is very high. The tolerance unit is in micrometers, and There is no collapse on the edge of the board.

Four look at the door

The door is the face of the cabinet and is as important as the person's face. The door panels produced by small factories are prone to moisture deformation due to improper handling of substrates and surface processes.

Five to see the overall assembly effect

Any dimensional error in the production process will be displayed on the door panel. The door panels produced by professional manufacturers are horizontal and vertical, and the gap between the doors is even. The cabinets and door panels of the small factory production will have uneven door gaps and uneven gaps. Big and small.

Six look at drawer slides

Although it is a small detail, it is an important part of the quality of the cabinet. Due to the size error of the hole position and the plate, an error occurs in the installation size of the slide rail, which causes the drawer to be pulled unsmoothly or left and right to loosen. It is also necessary to pay attention to whether the drawer gap is even.

Registration is polite! Buy building materials to win IPAD

Links: Common Household Curtain Type Introduction Home Decoration Required Course

Cabinets Purchase Home Renovation Furniture Home Formaldehyde Furniture Furniture Cabinet Doors Drawer Cabinets Doors Decoration Home

High Speed Door Accessories

About high speed Door Accessories:

1.Driving system: High Speed Door Servo System motor and control, motor SNMA / SEJ +reducer+flang+encoder+control box

2.Other accessories: Middle aluminium bar, bottom aluminium bar, aluminium vertical track, stainless steel vertical track, brushes,round nylon strip, PVC roll, rolling steel tube complete, drum be;;s for rolling tube, side end covers, stainless steel cover, steel tubes, air bag sensor system, safety light beam, Microwave sensor 24 Gigahertz,PVC welding machine, smoke and fire sensors, PVC transparent window, magnetic loop, photocell, remote control, manual push button, sound warning alarm Led lamp traffic light

For some main accessories, here is detain introduction:

1).24G radar sensor:

Brand: Hofic

Technology: Microwave processor

Maintain time: 0.5s

Protection: IP54

Transmitting frequency: 24.125GHz

Maximum installation height: <5meter

Transmitting power density: <5mw/cm2

Power consumption: <1W(VA)

Installation angle: 0-90°(lengthways) -30-30°(crosswise)

Supply voltage: AC&DC 12V-30V

2).Photocell:

Approval CE & ISO9001

Power supply AC/DC 12-30V

Static current 25A

Action current 40mA

Mounting distance Max 10m

NO or NC contact Done by NO./NC. contact selection

Working environment temperature -42℃ to +45℃

Working environment humidity 10 to 90%RH

Appearance dimensions( controller) 123*50*32mm(L*W*H)

Appearance dimensions(Magic eye head) 19*13mm(L*D)

3). Remote control

Operating Voltage: AC220V/50HZ+-20%

Transmit power:≤100mW;Super regenerative module, strong anti-interference

Operating temperature:-30℃-+70℃

Working frequency: 433MHZ;transmitter 1527, millions of encoding chip

Accept sensitivity:≤110dB

Manipulation method: electric remote control

Configure the quantity: Wireless number; factory configuration transmitter two. Can be equipped with PT2272 digital decoder chip

Configure the function: Up, down, stop, anti-lock full-featured reproduction

4). Magnetic loop

Voltage: 12V AC/DC +-10% 24V 115V AC+-10% 230V

Power: <2VA

Continued electrical output: 7A / 250V AC

Frequency range: 20 to 200K Hz

Response time: infinity (factory setting) or adjust maintain time

Sensitivity: 0.01% to 0.1% divided into 3 levels

Protection level: IP30

Electromagnetic compatibility (EMC) Complies with EM50081-1 and EN50082-2

Detection loop inductance: the limit of 40uH to 100uH ideal value 80uH to 300uH

Operating temperature: -25 ℃ to 70 ℃

Storage temperature: -40 ℃ to 85 ℃

Relative humidity: <90% non-condensing

Temperature compensation: automatic compensation up to 50 ℃ / h

Connection type: 11 pin DIN rail socket

Dimensions: 41 * 78 * 85 mm (width * height * length)

Weight: 250 grams

5). manual push button

This exit switch button is made of ABS and has built-in indicator light make it looks more elegant and fashionbale. It can be widely used in public entrance gates, public door, home, office, hotel, etc.

Door Exit Button Push To Exit Switch Door Opener For Access Control Security

Main Feature

Fashionable appearance

Made of ABS Plastic

Easy to install and operate

Used for access control

Specification

Mechanical Life: 500,000 test

Material: Plastic

6). Limit switch encoder

Voltage: DC5V-24V

Output voltage: high voltage≥85%Vcc, low voltage≤0.5V

Maximum mechanical speed:6000rpm

Anti-vibration: 50m/s,10-200HZ,XYZeach way 2 times.

Current consumption:≤30mA

Response frequency: 0-100KHZ

Protection: waterproof,oil proof,dust prevention, IP54

The output code system: binary code

Operating life: MTBF≥30000(+25℃,2000rpm)

Rotational inertia:4.0x10-8kgm²

Maximum load:radial direction20N

Axial direction:10N

Weight: about 0.4kg

High Speed Door Accessories,High Speed Door,Electronic High Speed Door Accessories

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hongfadoor.com