Rgb Fan,Rgb Dc Fan,Dc Rgb Cooling Fan,Rgb Dc Axial Flow Fan Crown Electronics CO., LTD , https://www.crownelectronicstw.com
Slide switch circuit problems and specifications. Slide switch 1P2T. Slide switch 1P3T. Slide switch 2P3T. Slide switch G-handle. Slide switch VG type. Slide switch handle, slide switch handle defines the toggle switch circuit problem, toggle switch circuit In the predicate, a few P is a few T (simple point is a few knives and several files), P is the number of circuits of the switch, and T is the number of switches, such as 1P2T for one road and two gears. (Simple example is that I want to control the light bulb on a line, the light is on when I dial, and the light is off when I dial back). By analogy, 1P3T is 1 knife and 3 files (for example, there are two red and green bulbs on one line. If we want to use switches to realize that they are not lit and the traffic lights are on, then a 1P3T switch can be implemented very well, that is, the switch is in In the first gear, the two lights are not lit. When the second gear is turned to the second gear, the red light is on. When the third gear is turned to the third gear, the green light is on; 2P3T is the second knife and the third gear. The 2P3T switch has two functions. Synchronously realized in the case of a toggle. The specific model is SS12F15 as described above, that is, it is a straight-slide type 1-pole 2-speed (1P2T) switch.
The length and shape of the switch handle of the toggle switch/slide switch: the normal handle length is named after G, in mm, such as SS12F15G5.
The switch handle is 5mm long. If you write SS12F15G12 is 12mm long. This is also the appropriate length to order the handle depending on the needs of the customer's own product. The switch handle has many shapes, but it is rarely used, so we only introduce the commonly used ones. The normal handle is the fine grain bud (divided bud and circular bud) as shown in Figure 7, that is, the finger is toggled. There is a good sense of touch (due to the wide variety of switches, the switch width is not the same, there are widths of 2mm, 3mm, 5.4mm, etc.). Depending on the needs of the customer's product. In addition, the V-shaped handle is generally available on a small switch. 