In general, stone pollution prevention is more important than cleaning, and daily long-term maintenance is better than sudden acute cleaning. Soil contamination can be reduced and prevented by proper design and material selection, careful construction and maintenance. The so-called correct design, that is, attention to the following things on the sandstone products: When sandstone products are processed in plane, externally inclined wall cap stones, parts that are not required to be drained by wall caves, structural parts where water flows into narrow places, water flows through concrete, glass or other building materials, and flow to sandstone surfaces are extremely easy Sandstone products cause pollution. In special circumstances, materials that match the properties of the stone should be chosen. For example, when used as a wall lining, it is necessary to protect the front of the elevator, the vicinity of the lift switch, furniture, and the like. Combinations between incompatible materials are prone to contamination. For example, a car leaks liquid on a sandstone surface. The permeable mortar laid on the deck or step will become a coal-based pollution. The seam after the wrong cleaning process is also an important reason. The correct treatment includes careful attention to transportation, storage, construction and other aspects. Thin panels are not only fragile and fragile, but also susceptible to stains. Attention must be paid to stubborn stains such as mortar, paint, protective layer spots, scaffolding rust and mechanical lubricants. From the storage period to the end of construction, the stone must be covered with a plastic layer or anti-fouling cloth as much as possible. Fully understand that the entire service process may cause internal and external pollution due to pollution or human contact. It must be isolated from the source of pollution as much as possible, often removing dirt and the like. In contaminated areas, use appropriate paint and building cleaners to clean the stains. When cleaning the stone, it should be moderate to prevent damage to the environment and workers or damage to the stone itself. Cleaning should be cost effective considering cost factors. Therefore, we must be familiar with the following matters: 1. Methods and places for convenient cleaning; 2. Feeling ability to cause loss of stone during cleaning; 3. Degree of contamination of the surface; 4. Whether cleaning is necessary.
Mesh Panel
Mesh panel with smooth surface and firm structure is made of high-quality low carbon steel, stainless steel and aluminum alloy steel. Its surface treatment includes PVC coated, PVC praying, hot-dipped galvanized and electric galvanized. The PVC coated and galvanized surfaces have good corrosion resistance and weather resistance, so it can provide a long service life. The common size of panel usually is 1800 mm × 3000 mm, we also accept other sizes for customers' needs.
Mesh Panel,Black Wire Mesh Panel,Galvanized Wire Mesh Panel,Reinforcing Welded Mesh Panel HENGSHUI YUZHENG IMPORT AND EXPORT CO., LTD. , https://www.yuzhengnails.com