Before the operation, there are certain opinions and understandings on the operation rules of the stone cutting machine and the accessories of the profile cutting machine. First, before work 1. Wear overalls and wear eye protection. The female worker will put the hair on the work cap. 2. Power knife switch, saw blade The tightness, blade guard cutting machine or safety baffle for detailed inspection, the operating table must be stabilized by the laser cutting machine, and there should be sufficient illumination at night. ——It can correctly use pistol drill, portable cutting machine, portable grinder and other electric tools;——can complete the installation of ordinary doors and windows, air-conditioning decorative louvers, light steel keels, ceilings, railings, escalators, etc. according to the product installation process rules, and Adjustment in place; use of stone cutting machine operating procedures and contour cutting machine accessories. 3. Turn on the main switch and test the airwheel for a few laps. It is only allowed to start after the safety is confirmed. Second, at work 1. Do not wear gloves. Wear a mask or face shield if it can cause dust during operation. 2. Do not attempt to cut small workpieces that are not clamped. 3. This cutting machine only allows cutting profiles. 4. Do not perform strong sawing operation, and make the motor reach full speed before cutting. 5. No one is allowed to stand behind the saw. 6. Do not lean over or bypass the saw machine. Do not loosen any hand or lift the arm from the saw or workpiece when the saw blade is not stopped. 7. Do not operate the guard when it is not in place. Do not place your hand within 15 cm of the saw blade belt machine. 8. Always turn off the power before servicing or replacing the accessories, and wait for the saw blade to stop completely. 9. If there is abnormal sound, stop checking immediately. Third, after work 1. Turn off the main power supply circular saw 2. Clean and organize the workbench and venue 4. In the event of personal or equipment accidents, the site shall be kept and reported to the relevant department. High Power Led,3Mm Red Hair Red Led,Green Double-Color Led,Red In-Line Lamp Bead Dongguan XINYUDA Technology Co., Ltd. , https://www.gdxige.com