ã€China Aluminum Network】 1) Tool path selection: Due to the external dimensions of the body parts and the characteristics of aluminum alloy materials, special requirements must be put forward for processing equipment and tools used for processing, such as chassis processing, side wall processing, The equipment used for bodywork processing is specially manufactured to meet the machining accuracy. The machining of various parts is mostly polyhedral machining, and three-axis or more linkage processing is not used. Although the current machine tool is five-axis, except for five-axis linkage in the tool change process, five-axis linkage is not used in other machining parts, but the workpiece size is relatively small. Large, it is difficult to install the card, as far as possible to ensure that a card is completed processing, which requires the machine to achieve multi-faceted processing. In the processing process, the processing route is selected for different profiles, plates, and loading conditions. 2) Processing vibration and tool selection: In view of the processing vibration, it is necessary to make demands on the tools. In addition to meeting the processing characteristics of aluminum alloys, these tools must have enough toughness to reduce the damage to the tool due to machining vibration and extend the tool. The service life. Aluminum alloy body parts are mostly post-weld, so most of them are deformed and need to be cut. In order to meet the requirements of welding and assembly, measures must be taken. Measurements are taken during processing, and each point measured is combined with the machining program. It can then be processed and the measurement cycles used here are CYCLE730 and CYCLE740. Some special parts measurement is necessary, for example, the front panel processing, because the panel thickness of 35mm larger removal can not exceed 3mm, then you must find the higher points on the panel, otherwise it will inevitably be processed excessively to find this higher The point needs the measurement program to be completed. Museum Lighting ,Led Track Light Projects,Magnetic Track Light FOSHAN CITY KURUI LIGHTING CO.,LTD , https://www.kuruilighting.com