Is the Spring decoration good? The advantages of spring decoration (profit) are mainly: The disadvantages of the spring decoration (disadvantages) are mainly: 1. Excessive air drying is a shortcoming of spring decoration. Because the construction site usually stacks a lot of construction materials, some of which are flammable or explosive products, there are certain safety hazards. 12 items that require special attention in the spring decoration:
Recoil Springs,Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring
Professional Recoil Springs manufacturer is located in China, including Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring, etc.
We are factory, we had made these products 15 years, we can give you good serve and quality. Hope to business with you!
Recoil Springs,Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring Shenzhen Lanejoy Technology Co.,LTD , https://www.szbrassnuts.com
As the saying goes, "One year's plan lies in spring". Many people say that spring is a good time for family decoration. Because the various building materials stores in Kaichun have various promotion methods, they can purchase more affordable building materials, and the decoration company will have more staff. However, there are still many people who think that the weather is warm and cold, and the changing weather in the spring has caused great troubles for home decoration. So, is the spring decoration good? Let's take a look at the pros and cons of spring decoration together:
1. Spring decoration is conducive to the stability of wood, not easy to be deformed by moisture, convenient for storage and use.
2, the spring decoration air circulation is good, which is conducive to the evaporation of indoor moisture, can shorten the construction period.
3. Spring decoration is conducive to the evaporation of harmful substances in the room and the purification of air.
2. In addition to drying, the spring decoration should be waterproof and moisture-proof, especially in the south, which is easy to appear in the south, and the wetness of the rainy season is also very high.
3, spring is the biggest season of wind and sand, indoor dust is relatively more, will have a certain impact on the decoration process.
1. When entering the field, pay attention to the moisturizing wood. After transporting it into the decoration site, be careful not to put it in a ventilated place. When the temperature is low, reduce ventilation. It is best to put a basin of water indoors.
2. Woodwork products should be sealed in time. The veneer used for spring decoration is in the most dry time, so its surface is very easy to be brittle after the production is completed. The moisture content of the wood wire used for the edge is higher than that of the veneer, so the surface should be sealed as soon as possible after processing, otherwise shrinkage will occur.
3. Prevent wood from being damaged by moisture. After buying it, it should be placed in the house for two or three days. After the gas phase is adapted, the construction procedure is carried out. Before the construction, the ground should be kept dry and the moisture-proof layer should be laid.
4. During the construction process, it is necessary to keep warm and the temperature in the spring is high and low. If the working surface such as plastering, putty, and tiling is frozen, there will be problems such as empty drums. Bricklayer mixing mortar and oil sprayer all kinds of paints, it is best not to open the construction and work according to the temperature in the product description.
5. Ceramic tile purchase requires careful spring decoration. The temperature difference between day and night should be larger. The surface is smooth and delicate, the surface is shiny and the back is soft, and the water content is suitable. The water absorption rate is small, the structure is fine, and the sound of the knocking sound is crisp and pleasant.
6. Pay attention to the ventilation of the window. Pay attention to the completion of the spring decoration. Pay attention to the ventilation of the window. If the ventilation is too large, the wind will be too large. The internal and external rate of change will be caused by the different internal moisture content of the ceiling, wood and wall. Cracks occur when inconsistencies occur.
7. The smaller the gap of the brick, the more need to be cured. Because the small brick joint itself contains less amount of grouting agent, the curing is not in place or not timely, it is easy to appear cracking of the floor joint grouting agent, the cracking of the wall joint grouting agent, and even Powdering phenomenon. Maintenance is usually carried out the next day after the paving is completed. The method is very simple, use a clean wet towel to lightly rub the brick joints to keep the brick joints moist.
8. The base layer moisture-proof primer can not save the construction of the wall coating, the base layer moisture-proof primer can not be saved. After the brushing is finished, pay attention to ventilation and ventilation to maximize the drying.
9. Pay attention to sand and dust pollution. Paint wood paint should be sprayed with a dry agent. After it is fully dried, it can be ventilated and prevent sand from falling on the surface of the dry paint.
10. The selection of high performance for interior wall coatings is expected due to the influence of humid weather, so special attention should be paid to the stability and bond strength of interior wall coatings and initial dry crack resistance. Method for quality inspection of interior wall coatings: Carefully observe the subtleties and record them in detail for comparison.
11. Note that the air purification in the house is finished, and the various flavors will not affect the health of people. They will put green plants or tropical fruits to quickly taste.
12. Note that the correct construction method must be constructed in the correct way to reduce the amount of rework.