Everyone should have contact with the outlet. It plays a very important role in our lives. In particular, many appliances need to rely on it to continue to operate. But what happened when the outlet was out of power ? In this case, how can we solve it? Let Xiao Bian tell you, let's take a look. 1, the socket is not charged how the matter First of all, it can be checked whether the electrical connection between the switch connected to the control socket circuit and the wires between the sockets is not good, there is a drop, oxidation, etc., and whether the threading screw of the threading thread is tightened. If this is the case, you can tighten the place where the contact is not good and where the screws are loose. Second, check if the switch has tripped. As long as the plug is unplugged first and then try to close the switch, if it still jumps, it means that the line is short-circuited; if it does not jump, it means that the line may be overloaded, or some home appliances may leak. What's more, if the outlet is out of power, you can use an electric pen to detect the outlet. If the empty bubbles are bright, it means that the zero line is broken; if the empty bubbles are not bright. It shows that the fire is broken. For those who are not familiar with this kind of circuit, then it is best not to tamper with them or pick them up. It is advisable to find a professional electrician to connect. 2, how to solve the problem The above is the content of the reasons why the socket is out of power. What is the correct handling method? a, to be ready to use the tools, including: stripping pliers, screwdrivers, electrical tape, multimeter, test pencil and a pair of insulated gloves. In addition, new outlets to be replaced need to be prepared. b. Use a screwdriver to disassemble the panel of the socket. If the power cable is not in good contact, you can tighten the screw on the terminal; if you need to replace the socket, just connect the neutral, fire, and ground cables to the wiring. In the column, remember not to injure the wire core, then install the socket in a fixed position, and finally tighten the screw. Before the socket panel is buckled, it can be tested. If you can use it normally, you can install the socket panel back. In addition, the zero line and fire line must not be connected incorrectly during operation, otherwise it may cause safety accidents. Xiao Bian epilogue: Well, for the socket is not how the electricity and socket out of power and how to solve it is introduced to this, I hope the contents of Xiao Bian can help everyone play a role. If you want to learn more, please continue to pay attention to this site, we will have more exciting content for you. What happens if the outlet is out of power? Digital Microscope ,Eyeclops Digital Microscope,Lcd Digital Microscope,Wireless Digital Microscope Ningbo Beilun Kalinu Optoelectronic Technology Co.,Ltd , https://www.nbyxmicroscope.com
