What is the welding process of the forklift battery pole?

<

The structure of the battery pole of the forklift depends on the size of the battery model and the battery capacity. The poles are the most commonly used outer pole structure, and the colloidal sealed battery also uses this pole structure.
The welding method of the pole is often done by hand welding and automatic welding. There are traditional gas welding in automatic welding; induction heating welding; tungsten arc welding.
The welding process of the poles includes the following two types.
1 forklift battery pole welding quality is very important for the battery, usually the minimum 6mm welding area to ensure complete welding, must have: a. Stable mechanical strength in the case of vibration; b. High current conductivity; c. The weld zone has strong acid resistance; d. Prevents the risk of solder joint cracking and microstructural changes under heat.
Improvement of 2-pole welding process: a. Induction heating welding technology; b. Tungsten arc welding technology. Welcome to http://Learn more about battery.

Self-Recovery Rapid Door

High Speed self-Recovery Rapid doors are the technological evolution of old, PVC high speed doors or heavy folding doors, now obsolete and not suited to today's industrial needs.

High-quality panels, the resistive safety edge fitted to the bottom edge of the door, photocells and barriers make this product both safe and durable, being totally self-repairing, thanks to its special [Anti Crash System".

This door designed with a perimeter structure in galvanized or stainless steel, which is ideal for sliding panels. The door panel rides effortlessly within a track, thanks to the special profile and hinge designed by us, requiring low maintenance. The panel is rolled up on a roller placed within the upper crossbeam.

The door can be equipped with a counterweight or ups batteries, to fully open the door in case of power failure, and can also be equipped with large transparent sections to create a brighter and safer working environment.

Self-Repairing Door Curtain made of reinforced PVC, with flexible weighted soft bottom edge.

The edge of curtain has continuous injection molded teeth that then move up and down in a self-lubricating polyethylene track attached to structural galvanized side frames.

Self-Recovery Rapid Door,Self Recovery PVC Rapid Door,Self Recovery Rapid Rolling Door,Self Healing Roll Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.spiralfastdoor.com