Linear Light
Simple but timeless, LEDER technology`s linear light delivers enough illumination and embodies the beautifully understated elements of minimalist design with clean lines and modern features.The clean lines of the linear light remind of early modern style.
This linear light is a stunning contemporary statement light fixture for your home. This versatile linear light is the perfect pick to add a touch of contemporary-style wherever you install it. The linear light`s stylish design blends into almost any decor in the bathroom, dressing table, mirror cabinet, bathroom vanity, and so on.
Features:
• Minimalist design
• Easy Reliable Installation
• Contemporary style
• Energy saving save electricity
• Color temperature :3000k-6000K
• Body color can be customized as RAL Code
• Type of protection: IP20
• Warranty:3 - 5 years
Versatile enough for almost any interior where the dramatic statement is needed such as a foyer, dining room, living room, or bedroom.We have rich production experience in lighting.Except LED Linear Light, we also offered other product in Indoor Lighting .Such as : LED Downlight , LED Panel Light, Track Light ,Wall Light , LED Strip Light , LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .
LED Linear,Linear Pendant Lighting,LED Linear Lighting,Linear LED Lighting LEDER LIGHTING CO.,LTD , https://www.lederlight.com
Analysis of the causes of dents in plastic mold processing
Plastic mold processing as a processing technology, after its production or completion, there will be some bad things. How to solve this situation? Below Jiuzhi Plastics Network Xiaobian to talk about two of the more common:
1. Dent. The reasons for the dents are:
1) The mold cooling is insufficient, and the cooling time is insufficient, which may cause serious deformation.
2) This situation can also occur due to insufficient internal pressure of the mold.
3) The thickness of each part of the product is different. In this case, the overall treatment method: reduce the temperature of the cylinder and the temperature of the mold, forcibly cool the place where the dent is generated, fill the flow edge with the dent, and control the difference in the thickness of the designed product.
2. Product whitening. The reasons for the whitening of the product are as follows:
1), too large to meet the pressure.
2), poor mold release. In this case, the overall treatment method: when designing the plastic mold, pay attention to the slope of the demoulding is sufficient. When making the mold, it is necessary to ensure that the cavity of the mold remains smooth, and the real-time treatment should immediately lower the injection pressure.
There are still many situations for the bad phenomenon in the processing of plastic molds. I hope that everyone will be cautious in the process of operation and strive to make the most perfect works.