Stainless steel surfaces must be regularly cleaned and maintained to maintain their gorgeous surface and extend their service life. 2 When cleaning the stainless steel surface, care must be taken not to cause surface scratching. Avoid using bleaching ingredients and abrasive washing liquid, steel balls, grinding tools, etc. To remove the washing liquid, rinse the surface with clean water at the end of washing. Hebei Boying Metal Co., Ltd. teaches you to understand the maintenance and cleaning of stainless steel "target=_blank> stainless steel mesh. Socket-Weld Flanges has a female socket in which pipe is fitted. Fillet welding is done from outside on the pipe. The socket welding flange is similar to a slip-on flange except it has a bore and a counterbore dimension.
First, why does stainless steel "target=_blank> stainless steel have good corrosion resistance?
A: The reason is that stainless steel "target=_blank> forms a passivation film on the surface of stainless steel. In nature, it exists in the form of a more stable oxide. It can be said that stainless steel "target=_blank> stainless steel, although used according to different conditions, The degree of oxidation is different, but it will eventually be oxidized. This phenomenon is called corrosion.
Second, stainless steel "target=_blank> stainless steel surface with dust and easy to remove dirt how to deal with?
A: Wash with soap, weak detergent or warm water.
Third, stainless steel "target=_blank> stainless steel surface grease, oil, lubricant pollution how to deal with?
A: Wipe clean with a soft cloth, then rinse with ammonia solution or with a special detergent or a neutral detergent.
Fourth, stainless steel "target=_blank> stainless steel surface with bleach and various acid adhesion how to deal with?
Answer: Rinse immediately with water, then dip with neutral carbonated soda aqueous solution or ammonia solution, and wash with warm water or neutral detergent.
Five, stainless steel "target=_blank> stainless steel screen surface has rainbow pattern how to deal with?
A: Stainless steel "target=_blank> stainless steel screen surface with rainbow pattern is caused by excessive use of detergent or oil. Wash it with warm water detergent.
Sixth, stainless steel "target=_blank> how to deal with rust caused by stainless steel surface dirt?
A: It can be washed with grinding detergent or 10% nitric acid, or with special washing drugs.
Seven, stainless steel "target=_blank> stainless steel maintenance need to pay attention to the problems?
A: 1. Stainless steel "target=_blank> stainless steel surface must be regularly cleaned and maintained to maintain its gorgeous surface and extend the service life. 2 cleaning stainless steel "target=_blank> stainless steel surface must be careful not to scratch the surface Avoid the use of bleaching ingredients and abrasive washing liquids, steel balls, grinding tools, etc., in order to remove the washing liquid, rinse the surface with clean water at the end of washing. Http://news.chinawj.com.cn 
Maintenance and cleaning of stainless steel screens "> Edit: (Hardware Business Network Information Center) http://news.chinawj.com.cn
The counterbore is slightly larger than the O.D. of the matching pipe, allowing the pipe to be inserted into the flange similar to a slip-on flange.
The diamter of the smaller bore is the same as the I.D. of the matchine pipe A restriction is built into the bottom of the bore which sets as a shoulder for the pipe to rest on.
Weld Flanges,Socket Weld Flanges,ANSI Socket Weld Flanges,Steel Socket Weld Flanges
Shandong Zhongnuo Heavy Industry Co.,Ltd. , https://www.znforged.com