It is coated with 0.2-0.4mm soft or semi-rigid polyvinyl chloride plastic film on the steel plate or profiled steel plate, divided into two kinds of single-sided and double-sided coating. It has the characteristics of insulation, wear resistance, corrosion resistance, oil resistance, etc. It can be used for wall panels and roof panels. Decorative panels Is it sliced ​​or cut to 0.2?1 thick with natural wood? The thin sheets are made by affixing them to plywood, fiberboard, chipboard, and other substrates after being put together. This material has a clear texture and natural color and is a higher-grade decorative material. Calcium plastic board It is based on high-pressure polyethylene as a base material, adding a lot of light calcium carbonate and a small amount of additives, after plasticizing, hot pressing, foaming and other processes. This plate is lightweight, soundproof, heat-insulating and moisture-proof. Mainly used for ceiling surface materials. Medium density fiberboard Density fiberboard is a kind of man-made board. It uses plant fibers as raw materials, and is cut into pieces, separated into fibers, formed into slabs (mixed with resin glue and additive paving), under heat and pressure, cellulose and hemicellulose and A sheet of lignin plasticized. Fibreboard According to the bulk density, it can be divided into hard fiberboard, semi-hard fiberboard and soft fiberboard. Hard fiberboard is mainly used for the panel of the ceiling and partition wall. The board surface is drilled to form various patterns. The surface is sprayed with various paints, and the decorative effect is better. Hard fiberboard sound absorption, waterproof performance, durable, easy construction. Yellow Pineapple Wood The wood is glossy, the annual rings are clear and uniform, the material is soft, easy to dry, and processed. The material color and pattern are very beautiful. It has good paint and cementation properties, is not easy to crack, and has good corrosion resistance. It is a material for high-grade furniture. Tochigi Aroma, anti-corrosion, pest control, slightly lighter material, not easily deformed, easy processing, smooth cut surface, beautiful color after painting. Plate three trees paint decoration paint furniture Low porosity clay bricks are made of ruby, mullite and combined clay as the main raw materials, molded under high pressure and sintered at high temperature. The product has excellent high temperature Physical properties and chemical corrosion resistance. Low porosity clay bricks have good stability, the degree of erosion does not occur sudden change, than ordinary clay bricks use cycle increased 2-3 times. Thermal conductivity, specific heat and solubility, respectively, than ordinary clay bricks 2 times higher than 10% and 40%, heat storage capacity than ordinary clay bricks higher than 50% -60%, can improve the thermal efficiency of the kiln. Arc Type High Alumina Bricks,Rotary Kiln High Alumina Curved Brick,Kiln Arch Refractory Bricks Huixian Xinwei Refractories Co. , https://www.xinweirefractory.com