You don't know the way of printing Speaking of our printing road can be said that our practice has proved that it has gradually become the mainstream of our urban road construction. At the same time, our printing approach is also widely controversial. Today, Liaoning Plinde is here for you. Explain our approach to printing. The printing road practice of Plinde in Liaoning can be said to have been through a lot of engineering practice to improve our printing road practices. At the same time, our printing practice in Plinde in Liaoning is roughly as follows; 1. Spreading reinforcing materials and collecting light. The spread of our reinforcing materials and the collection of light will be decided on the basis of the site conditions of our printing road construction. 2. Dispense the color release powder. Disperse the mold release powder should be prepared when the mold is to be started. Since the material is a light powder, it should be scattered away from the strong wind and spread in the downwind direction. 3. Use a mold to texture the road surface, ie mold it. The mold should be used in conjunction with, first determine the distribution direction of the texture, select the position and angle of the first mold, and then place the other molds in close proximity to the first mold. After the mold is imprinted, we must go through the scene to determine when to flush, after the rinse is dry, apply the protective agent to the brush. After the brushing is completed, our printing method steps are completed. Of course, our printing method is Need to make final decisions based on your needs. Emergency Led Drivers,Emergency Battery Backup Led Driver,Led Emergency Backup Driver,Emergency Light Drivers Foshan Nai An Lighting Electric Co.,ltd , https://www.fsnaipsled.com