When signing a decoration contract, pay attention to the following aspects:

1 Time agreement: General 2 bedroom 100 square meters room, simple decoration, the duration is about 35 days, decoration company for insurance, generally will be scheduled to 45-50 days, if you are anxious to stay, you can sign and design Discuss the terms.

2 Payment method: General decoration contract, agreed down payment 60%, woodworking acceptance after paying 35%, pay 5% after completion. If you follow this form of payment, you will already pay about 95% of the cost to the decoration company after the construction period is over half. If there is any problem in the later stages of the renovation, it will be difficult to constrain the decoration company. . Therefore, it is recommended that when signing a contract, the down payment can be reduced to 30%, and 30% in the middle period.

Medium-term payment: The medium-term payment time agreed on the general contract is simply marked with "more than half of the project, carpentry closes." However, a construction site is often a multi-project crossover operation. More than half of the regular construction period should be: the end of wood production; kitchen walls, floor tiles, ceilings; the end of the wall leveling;

3 Increase and decrease items: During the decoration process, it is easy to increase or decrease the number of items, such as making more cabinets, changing several meters of water circuits, etc. These must be paid at the time of completion. So what should be the unit price of these projects? If you wait until you have started, then this may be the design of the finale. Therefore, if possible, it would be best to make a copy of a complete quotation from the decoration company that was initially shown to you so as not to change the price of the decoration company when signing a contract or increasing or decreasing a project.

It is also important to note that when you finalize the fees, the increase or decrease you should pay should be signed and approved by you before construction of the project. If you did not sign the agreement, you can not pay the corresponding fees.

4 Warranty Clause: The entire process of renovation is mainly based on manual on-site production, but it has not been fully industrialized, so it is inevitable that there will be a variety of fine-quality problems. During the warranty period, the responsibility of the decoration company should be particularly important. For example, if there is a problem, the decoration company is responsible for the entire warranty, whether it is only the contractor, is not responsible for the material warranty, or there are other restrictions, which must be clearly written in the contract.

5 Hydropower costs: During the renovation process, on-site construction will use water, electricity and gas. Generally speaking, at the end of the project, the utility bills add up to a number that is not a small sum. The cost should be paid by anyone and should be indicated in the contract.

6 Construction according to the plan: In strict accordance with the drawings that you have signed and approved, you may request rework if the detail size is not consistent with your design drawings.

7 Time and frequency of supervision and quality inspection on-site: General decoration companies distribute the project to each construction team. Quality inspection personnel and supervision are the most important supervision methods for decoration companies. Their time interval for on-site visits to the project The quality is particularly important. Supervisors and quality inspections should arrive once every 2 days. The design should also be presented 3-5 days at a time to see if the on-site construction results are in line with your own design.

Entrance decoration study decoration decoration design decoration decoration company room square meters decoration decoration decoration company please kitchen ceiling cupboard

Cold Storage Room Fast Door

Cold storage room fast door are used to industrial warehouse applications, our cold storage doors combine the latest technology, premium materials and design features to meet the demanding requirements of the cold storage industry. Available as a sliding, swing and vertical lift door, all Cold Guard doors incorporate a tough and thermally neutral fiberglass reinforced pultrusion framework, extruded plastic polymer casings and Non-CFC foamed-in place polyurethane core. We understand the conditions that cold storage doors must endure. Superior design methods and non-corrosive materials ensure that Cold Guard will perform and look good for years to come!

The advantages of cold storage fast room door

Excellent Insulation Properties

Save Money on Temperature Costs

A Variety of Cold Room Options

Temperature Control and Efficiency

One of the most important benefits of our cool room panels is passive temperature control.

Safety for You Too

Not only are our cold room panels very hygienic, they also allow for superior safety. Their low allergenic qualities and enhanced seismic performance will protect you while you`re at work.

Cold Storage Room Fast Door,Freezer Room Fast Door,Freezer Room Insulated Fast Door,Thick Curtain High Speed Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfhighspeeddoor.com