How to store the self-priming pump science

<

In many areas, self-priming pumps are used to treat the oil stains in the workshop or in water spots. Generally, the places with heavy pollution will be used once a month, and if it is not very serious, they will be used once every three months or so. How to store the self-priming pump at this time is still the focus that your friends should care about.
Storage method 1: cool and dry place
Because the self-priming pump contains a large number of resistance wires, once it is placed in a damp place, the moisture entering the inside of the machine will not only make the self-priming pump unable to work properly, but may also cause the risk of leakage. Therefore, it is placed in a dry warehouse, and a dust cover is wrapped on it to prevent fine dust from entering the self-priming pump, causing damage to the machine's quality. In the face of relatively sunny weather, it is also possible to open the window of the warehouse so that the self-priming pump and the sun can come in contact with the air to ensure that the parts inside are treated with secondary drying.
Storage method two: wipe clean
After the self-priming pump is used, it is necessary to select a clean towel to clean the sediment inside the pump and ensure that it is cleaned before storing and storing it. Avoid the occurrence of chemical reactions in the pump due to the mud inside, resulting in a crisis of late use of suction or inability to work. Cleaning the self-priming pump can use the way of water circulation cleaning, and can also let the soil fall off naturally by sunlight, ensuring that the secondary use can be carried out as scheduled. The dirt inside or a lot of stains during the cleaning process, to ensure that it will not be congested into the water pipe, this is an important way to ensure the extension of the life of the machine.
The scientific and reasonable storage method of self-priming pump not only makes the product use quality satisfy people's satisfactory effect, but also meets people's standard requirements in ensuring the machine use stage.
Reminder: This article was published by the Shanghai Blue Fire Pump manufacturer.

Sensor Led Down Light

Specifications

Recessed LED Downlight with built-in Microwave Motion Sensor

Model AM-6.0GY
Luminous flux 800~900lm
Luminous Efficacy >80lm/W
Colour Rendering index 80
Beam Angle 140°
Light Decay <30% over 10,000 hours
Rated Lifespan >30,000 hours
Power consumption 10 watts
Input voltage / Frequency 80-260vac 50-60HZ
Reflector / Diffuser Frosted diffuser
Operating Environment -20°c~+50°c
Dimensions Φ193*77mm
Hole Cut Size Φ160~Φ180mm
LED Source 56pcs SMD2835
Working mode ON/OFF or Full/Dim
Sensor Range 180*360 degree
Sensor Distance 6-8m Radius
Delay Time 18-25s
led

Sensor Led Down Light,Recessed Led Down Light,Led Ceiling Down Light,Smart Down Light

JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.zjsensorsled.com