Aluminum composite panel ceiling decoration preparation Thread Rod,all thread rod,metric threaded rod,galvanized threaded rod Jiangsu Minglu Stainless steel Co.,ltd , https://www.minglubolt.com
[Work before aluminum-plastic panel ceiling construction]
(1) Before loading aluminum-plastic composite panels, first check the quality of the skeleton, focus on checking the straightness of the boom, and the force is even; the spacing of the keel is not more than 500mm (wet environment design requires proper reduction of spacing), and the lower surface of the keel is smooth without falling. , accessories connected closely, firm, etc., can only be bound after confirming the qualification.
(2) The cutting of the board is broken along the cutting so that the edge of the cutting board is straight and square, and there are no defects such as falling corners.
(3) The slab is fixed, and the side and the (enveloping edge) of the aluminum-plastic panel are laid perpendicular to the supporting keel, and there is a phenomenon of suspension under the right. Aluminium-plastic panels should be tightly connected but they must not be forced into place. Starting from a corner or middle row, it is not appropriate to book at the same time. It is required that the seams should be straight, with the same width and width, and there should be no staggering phenomenon.
[Aluminum composite panel ceiling construction technology]
In the selection of materials, the specifications and colors of the materials used in the aluminum-plastic panel project shall meet the design requirements, and the aluminum-plastic panel shall have the product qualification certificate; the surface of the decorative panel shall be smooth, the edges shall be neat, the colors shall be the same, and the pitch of the perforated plate It should be neatly arranged.
In the construction process, its quality standards must achieve:
(1) All kinds of specifications, colors, qualities and their skeleton structures, fixing methods shall meet the design requirements and quality standards.
(2) Ceiling keel and cover panel, the installation must be solid, neat appearance, beautiful, no deformation, no bleaching, no incomplete, no crack.
(3) The light steel frame must not be bent and deformed, and the paper panel must not be subject to moisture, warpage, lack of ribs, no delamination, drying, and uniform thickness.
(4) Foreign objects are not allowed to impact and contaminate when the ceiling is installed. 
(5) After the ceiling installation is completed, the actual measurement shall be made. Usually, within 10 meters, the large-area auditorium conducts spot checks of not less than 10% of the test points between isometric axes.
(6) The cover panel with patterns and floral ornaments shall be provided with uniform pattern and floral ornamentation after construction, and the patterns at the seams shall be matched and the bead shall be kept straight.
Xiaobian epilogue: The above introduced the aluminum-plastic panel ceiling construction technology . Remind friends, we must pay attention when choosing aluminum-plastic panel ceilings. There are some inferior substrates on the market. The materials are waste aluminum, recycled aluminum, or earth aluminum. The products are easily deformed, easily oxidized, and some even contain The recycling of chromium, lead, mercury and other harmful substances waste aluminum, so it is very important to choose branded aluminum-plastic panel ceilings. If you want to learn more, please continue to pay attention to this site information platform.
Preparation of aluminum-plastic panel ceiling construction process is also very important
Aluminium-plastic plates not only have good mechanical properties, but also have excellent decorative, malleable, flexible installation, and reliability, and their application range is quite wide and is further expanded. The aluminum-plastic panel has the advantages of elegant appearance, beautiful fashion, fire-proof and environmental protection, and convenient construction. It is considered as a new type of high-end decorative material for modern indoor and outdoor use, especially for ceiling decoration. Nowadays, materials for kitchens and bathrooms are generally made of aluminum-plastic plates because it is not easy. Deformation. So what should pay attention to the construction of aluminum-plastic panel ceilings ? Is there any construction standard ? Let's have a look right now.