Simple maintenance and maintenance of electric screwdriver 1. When inputting the power supply, be sure to determine the voltage. 2. Keep the electric screwdriver clean and refuse water. 3. Regularly replace the carbon brush. When replacing the toner, remove the toner to avoid short circuit caused by accumulated toner. The carbon brush must be replaced when it is 1/4 of the time. 4. Replace the original carbon brush. If a harder carbon brush is used, it will last longer, but it will cause abnormal armature loss, but it will not be worth the loss. 5. The motor bearing should be lubricated regularly, the oil should be in an appropriate amount, and too much will flow into the magnet case, and the motor will lose its torsion and torsion. 6. Regular gear oil on the gear box, no liquid oil or butter. The thickening of the butter can cause the gear assembly to heat up. When oiling, be careful to avoid foreign matter falling in and causing damage. 7. The fuel can not be refueled in the headstock. If you add oil, it will produce oil rust and bite the screwdriver head, which will make it impossible to replace the screwdriver head. 8. All parts of the electric screwdriver, no substitutes can be used to ensure the torque accuracy. 9. In addition to the above, other conditions can contact the starter supplier. Handled by a technician. Concerned about surprises Label: Simple maintenance and maintenance of electric screwdriver Previous: The different principles of pass lock and smart lock Next: How does the metal stamping parts come from?
Summary:
Shandong Jinzhong Company is a manufacturer of discontinuous totalizing automatic scale. Our Company adopts advanced technique to produce the product. ABS-XL discontinuous totalizing automatic scale has the characteristics of high accuracy, stable performance and reliable operation, suitable for commercial settlement and weighing control in the process of production. It is the best equipment for weighing bulk commodities with high accuracy in deposits, ports, etc.
ABS-XL series discontinuous totalizing automatic scale is composed of feed hopper, weigh hopper, supporting frame, pneumatic system, weighing controller and controlling box.
Main uses:
This kind of scale is suitable for weighing dry and free-flowing bulk commodities in grain, metallurgical, cement and chemical industry.
Hopper Scale,Square Weighing Hopper Scale,Automatic Hopper Scale,Automatic Square Hopper Scale SHANDONG JINZHONG SCIENCE & TECHNOLOGY GROUP COMPANY LIMITED , https://www.chinagoldbell.com