The ash trim panel may not be familiar to many friends. It is a type of veneer. It is cut into thin layers, adhered to the surface of plywood, and then hot-pressed to make furniture or decoration. Let Mengstun Furniture Xiaobian specifically introduce the relevant knowledge of ash trim panel, I hope everyone can see after harvest! Water ash trim panel is good Ash panel features: natural and clear texture, green and healthy, rough and rustic lines, but also in the solid wood furniture prices are relatively appropriate, therefore, ash furniture is deeply loved by many people. From the material of the ash furniture, the material of the ash is tough, the texture is clear and beautiful, and the gloss is good. Generally, the height of the growth is high. The material of shuiliu is relatively tough, and the manufactured furniture also has this feature. In addition, the shuiliu furniture also has the characteristics of wear resistance and humidity resistance. In terms of the performance of ash furniture, ash is suitable for processing, has higher stability, is not easy to age, and has good shock and steam resistance. The ashtree veneer panel is a thin layer of ash that is cut into thin layers, adhered to the surface of the plywood and then hot-pressed. Only the upper thin layer is ash, which controls the interest and price very well. The pattern of ash itself is very good, fresh and natural, recently popular white paint, brush thin, revealing the texture of ash, the effect is quite good. The ash trim panel is beautiful and practical, the price is not expensive, the material selection is very good, the ash trim panel is used to make the desktop, and the chair can be easily cleaned and maintained. The usual tables and chairs are used by many people Made by verses. ASH decorative panel installation notes (1) The installation of the ash trim panel installation shall be carried out after the acceptance of the quality of the substrate or the base layer. The substrate should have sufficient strength, stability and rigidity, and its surface quality should meet the requirements of the engineering quality acceptance specification. (2) Before the construction, there should be a model of the main material or a sample wall or a model room on the same substrate. After the experience is accepted and the construction plan is determined, it is formally constructed. (3) The quantity, specification, location, connection force method and anti-corrosion treatment of embedded parts (or embedded parts) and connecting parts in the installation process of ashtree veneer must meet the design requirements. The on-site pull-out strength of the back embedment must meet the design requirements. (4) The installation of ash trim panel shall be smooth and firm, the joint width shall meet the design requirements, and shall be densely packed to prevent seepage. (5) The size and direction of pressure of the metal veneer should meet the design requirements. (6) The treatment of seismic joints, expansion joints, settlement joints, etc. in the installation of ashtree facing panels shall ensure the integrity of the function of the joints. (7) In winter construction, the temperature of the mortar should not be lower than 5°C. Before the mortar hardens, antifreeze measures should be taken. (8) After the project is completed, product protection should be done to prevent pollution and damage. The above is related to the introduction of the ash panel , I hope to use this article to better understand the ash panel, want to know more about the knowledge associated with ash may wish to visit the decoration 123 network. Hexagonal Wire Mesh,Hexagonal Net,Galvanized Hexagonal Wire Mesh,Hexagonal Steel Wire Mesh ANPING HONGYU WIREMESH CO.,LTD , https://www.hongyufence.com
