In so many decoration knowledge, pick a best decoration effect and then arrange the room, you can complete the interior decoration photography, interior decoration photography, you can post similar works below the corresponding keywords, let readers view the words There is an intuitive reference for the article, and then let Xiaobian take everyone to look at the exciting content of interior decoration photography .

First, the basic camera settings

I believe that everyone can guess the camera settings from the above features, in fact, it is very simple.

Wide-angle lenses do not require ultra-extreme wide-angle lenses. In full-frame format, a 24-35mm lens is suitable.

You may wish to try the 18-55mm entry lens first. If the lens is too deformed, use a 50mm lens to shoot the parts and then merge.

Use a smaller aperture of F16 or higher to ensure that every detail is clearly visible, and of course with a slow shutter

In addition to the slow shutter of the tripod, the tripod can also check the level of the camera.

The shutter release / remote control in daylight calculations, using F18 and ISO 100 requires exposure for 10-30 seconds. If it is dusk, the sky starts to dim and it takes 45 seconds or more. It is also convenient to use the shutter with the shutter.

Second, how to decide the exposure

Since the aperture is already set, exposure is the key to decisiveness. How to determine the exposure time when facing the extreme gap between the window and the room?

This is a problem that every home will face. Sorry, based on the lack of digital tolerance, it is impossible to accommodate the window, and the exposure in the window is impossible. There are several ways to make up for this deficiency:

Use HDR to merge using three different exposures

The original intention of HDR is to make up for the lack of tolerance, but the tone does not look natural.

If you can only use one photo, prefer to have insufficient internal exposure, and try to keep the scene outside the window. Because the digital can keep the underexposed information, the overexposure will not save it. For example, the window is 1 second, the window is 20 seconds, may be exposed 8 Second, it is a little bit outside the window

The tolerance of using film film is relatively large

The author also switched to film in the late stage. In fact, it took more time and effort.

Give up natural light and use flashing lights

Combine the photos and simply go down the scene outside the window (as shown below)

Pay attention to the excessive exposure, the edge of the window frame will be blurred, you need to make corrections and carefully

When you want to pay attention to the merged photos, you can reflect the reflective places outside the window, so I have dimmed the whole photo. In addition, if the exposure time has been too long (more than 30 seconds), you are worried that the exposure is not accurate. This is unnecessary because the longer the exposure time, the less the exposure error is.

The above is the introduction of the relevant content of interior decoration photography. I hope that readers will be able to see and hear, and you will benefit from the application in real life. Ok, today's introduction to interior decoration photography is here. Thanks to readers and friends for reading this article and for their support and love for small series. If you want to get more information about home decoration, please continue to pay attention to the decoration home. network.

More related wonderful reading:

Photo studio decoration style photography studio decoration design

How to decorate the studio? Studio decoration design

PH-B-L5

Phlizon 1000w/1500W/2000w /2500W/3000w COB LED Grow Light, it will give you more options when your plants need different strength of illumination.

Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED Grow Lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.

1000w 2000w 3000w 1500w led Grow Light Features

Indoor grow light

COB series, high power branded CREE COB with high Par value and deeper penetration

VEG/BLOOM and STRONGER switches for each grow stage.

Special spectrum for plant growing to increase the yield.

Building to Harvest: Beneficial for seeding to fruiting stage.

Good quality fans with low noise.

Easy to install by minute

Energy Saving, environmental friendly

3 Years Warranty

We are a professional Chinese manufacturer of PH COB Series, and look forward to your cooperation!

PH-B-L5

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlight.com