As a place where we cook meals every day, kitchen decoration is very important. Kitchen decoration includes many aspects such as: hydropower projects, cabinets, walls, floors, etc. Therefore, many materials are used. What are the steps for kitchen decoration materials and kitchen renovation? The following small series is simple for everyone to introduce! What is good for kitchen decoration materials 1. Wall decoration materials The kitchen is a place that is easy to see dirty, so the wall materials must be easy to clean, and the tiles are most suitable for the kitchen wall. In addition, the kitchen wall materials must also be resistant to high temperatures and deformation, and considering the safety, it is best to use fire-resistant panels, tiles and other materials. 2, floor decoration materials Kitchen floor decoration materials and walls are the same, the important point is easy to clean, followed by the floor tiles must have very good waterproof, anti-slip effect. Here Xiaobian reminds everyone that the kitchen floor must not use stone materials and wood floors, because these two materials are not only not good care, waterproof and dampproof effect is not good, very practical. 3, ceiling decoration materials The ceiling of the kitchen does not need to be overly publicized, but the ceiling must be fireproof and resistant to deformation. The best ceiling material now is the ceiling of plastic gussets and aluminum gussets. The plastic material is relatively cheap, but the color is relatively small, aluminum buckle is very beautiful, there are two kinds of square plate, long strip, color and color are more. 4, cabinet materials The main furniture in the kitchen is the cabinets, and now there are many cabinet materials, common are solid wood, plastic, paint, fire board, etc., we can decide according to the kitchen decoration style and their own budget to buy what kind of cabinet. What are the kitchen renovation steps 1. Demolition If it is an old house reconstruction, first remove the original tiles and ceilings as well as kitchen utensils and lighting fixtures on the walls and floors; if it is a new house that wants to change the layout of the original kitchen, the task of demolition of the wall must be carried out first. 2, waterways, circuit transformation After the wall was dismantled, the waterway and the circuit were rebuilt, and the current water circuit and circuit were made into a dark pipe, which was beautiful and safe at the same time. 3, wall surface, plaster leveling After the floor and wall are dismantled, the cement leveling wall and the unevenness of the ground will be carried out, which will help to waterproof the next step. 4, do waterproof After the cement is dry, it is necessary to apply waterproof coating on the wall and floor 2-3 times, and then do the water test for 24 hours. 5, tiling After waterproof, you can start tiling. When you paste ceramic tiles, you can't add more than 5% of the empty drum. The gap between the two bricks in the corner of the seam is no more than 2mm. 6, install ceiling, cabinets, lamps After affixing the wall tiles and floor tiles, relevant personnel can be invited to install ceilings, cabinets and lamps. (When the cabinet is designed for the installation position of the smoke machine, the hole for the smoke pipe needs to be opened when the ceiling is installed) Xiao Bian concludes: What is good about kitchen decoration materials and what are the steps for kitchen renovation? I do not know if it will help everyone! Nowadays, there are many kinds of kitchen decoration materials . It is recommended that you must compare them after choosing.
Industrial sectional doors are the most durable and longest lasting doors to ensure circulation at the areas of the factory entrance and exit of goods, loading and unloading areas.
The body of sectional door is forming by 40 mm sandwich panels. These panels provides sound and heat insulation due to the intense doped polyurethane insulation was injected between galvanized steel sheet. (50 kg/m3).
Industrial sectional door systems provide space-saving with opening parallel to the ceiling.Any opening can be used clearly . and produces in accordance with the transition range and the height in the factory buildings or warehouses.
Doors is working sliding by be the most appropriate the gap between the top level of the gate with a ceiling height within the side rasils. The door can be mounted in different ways according to the gap distance (standard, low, highlift and vertical track systems).
Industrial sectional doors can easily be opened automaticly by 230-380 V-AC/50 Hz electric motor or manualy thanks to torsion spring system that balances the weight of the door.The galvanized springs are made to be durable of 25.000 door cycles.Motor with emergency chain All the drive systems have a mechanical back-up system fitted to the reduction gearbox of the electric motor, so that the sectional door can be opened if the power fails. The reduction gearbox can then be powered using the chain.
Industrial Sectional Door,Industrial Overhead Sectional Door,Industrial Warehouse Sectional Door,Industrial Garage Interior Sectional Door Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffreezerdoor.com
