[China Aluminum Industry Network] Correct Usage of Aluminum Alloys and Routine Maintenance Matters Aluminum alloy doors and windows are popular because of their practicality. They have good insulation properties and can effectively isolate noise to some extent. As the name implies, it is a kind of door and window made of aluminum alloy extruded profiles. However, no matter how good the performance materials are, it will inevitably lead to all kinds of unexpected small problems in the long-term use. These small problems will bring about security risks and inconvenience to the normal use of life as time goes by, so we must Pay attention to relevant maintenance matters in your daily routine.

Front, aluminum alloy doors and windows of the correct use of many people in the daily use of doors and windows in the process, rarely used with caution, in the switch can not effectively control their own strength, so bring unnecessary damage, where needed To remind everyone that the best quality products can not stand the use of brute force, so the daily use of aluminum doors and windows in the process, we push and pull the action as much as possible. If you find it difficult to push and pull, don't push it too hard. Check patiently to see if there is a fault. Dust and deformation are the basic culprits.

When the weather changes, it is also necessary to pay attention to maintenance and use, such as rainy days and snow days. After the rain stops, the water in the dry chute should be wiped clean with a soft cloth. You can also apply a small amount of oil to reduce friction. After the sand weather ceases, the dust from the aluminum alloy doors and windows should be removed with a vacuum cleaner.

Second, do regular cleaning work Aluminum doors and windows must pay attention to cleaning in daily use, especially the dust and dirt in the corners of the door frame, if you do not do the cleaning in time, it will affect the normal use, so before doing the cleaning, it should be Use a vacuum cleaner to remove the dust. Then wipe it with a softer cloth and mild water. If the dirt is difficult to remove, use a neutral detergent to help wipe it. Remember to use acidic and alkaline cleaners that will damage the doors and windows, laundry detergent soap is not OK, do not use the door frame as a support point when cleaning.

Third, Fu Xuan reminds you: daily inspection is essential 1, in daily use, it should be regularly checked, in particular, check the link, hardware accessories, etc., if damaged accessories timely exchange, to avoid small problems evolved into large problem. There are three parts in the aluminum alloy doors and windows that are easily damaged. They are positioning pin, wind bracing, and floor spring. These three parts are easily damaged. Therefore, these places must be clearly seen and problems must be repaired in time.

2, in the frequent friction place, be sure to regularly apply oil, so as to avoid difficulties in the use of push-pull conditions.

3, in the framework of the connection, there are several screws must also pay attention to the occurrence of loosening should be done in a timely manner fastening treatment.

4. Sealed tops and glass sealants are the key to the sealing and thermal insulation of doors and windows. Once the shedding phenomenon occurs, relevant materials must be found in time for filling.

The use of Fuxuan aluminum alloy doors and windows in the right way can make it play a greater role in long-term use, and some improper use will not only cause damage, but also make doors and windows lose good sealing and heat preservation. At the same time, if maintenance is done regularly, it will also greatly extend the service life.

Titanium Parts include Pure Titanium Crucible,Pure Titanium Screw,Pure Titanium Springs and so on.