WAFER TYPE DOUBLE DISE CHECK VALVE Wafer check valve is also known as reverse flow valve, check valve, back pressure valve and one-way valve. This type of valve is automatically opened and closed by the force generated by the flow of the medium itself in the pipeline. The valve used to prevent the backflow of the medium belongs to an automatic valve. Wafer Type Double Dise Check Valve,Double Disc Check Valve,Double Disc Wafer Check Valve,Wafer Type Butterfly Valve Inner Mongolia Overseas.Trade co.,LTD , https://www.flangevalvejoint.com
In order to implement the national medium and long-term talent development planning, promote the transformation and upgrading of the machinery manufacturing industry, and better support the continuous innovation and development of the super-hard materials and products industry, according to the requirements of the professional and technical personnel knowledge update project, the Ministry of Human Resources and Social Security approved the case. The National Advanced Training Course on Superhard Materials and Products, hosted by the Henan Mechanical Engineering Society, will be held in Henan in late October. The specific matters are hereby notified as follows:
First, the training content
1. China Machinery Industry Development Report;
2. Diamond single crystal, coarse particles, large single crystal synthesis, fine powder manufacturing technology;
3. Cubic boron nitride single crystal synthesis and micropowder manufacturing technology;
4. Superhard abrasive manufacturing technology and superhard abrasive grinding technology;
5. Superhard tool manufacturing technology and application;
6. Special equipment for superhard materials and products industry;
7. Business development and management of super-hard materials and products;
8. Visiting study and exchange of experience.
The instructor is an expert from the domestic superhard materials and products industry. He has long been engaged in the research and development of technology and equipment in China's superhard materials industry, and has rich practical experience and theoretical level.
Second, training time and place
Training time: October 21st - 25th, 2014, October 21st is the check-in time;
Venue: Sanheyuan Hotel, Rucheng County, Shangqiu City, Henan Province, China 0370-6022222
Intersection of Futian Avenue and Shanghai Road in Yucheng County.
Yucheng County Government Contact: Chen Hongwei Mobile
By car: From the Zhengzhou Liulin toll station on the Lianhuo Expressway (G30) to the east, then to the Shangzhou Expressway (S81), and then from the Shangzhou Expressway (S81) Yucheng North Toll Station to the Sanheyuan Hotel.
Yucheng County Route:
After exiting from the Yucheng North Toll Station, turn left to the south to enter S210 Provincial Highway, then drive to the intersection with Futian Avenue (S206), then turn left onto Futian Avenue (S206) and follow Future Avenue (S206) to the future. At the intersection of Avenue and Shanghai Road, on the north side of Futian Avenue (S206) is the Sanheyuan Hotel.
Third, the participants
Practitioners of the industry and related industries in the superhard materials and products industry.
Fourth, other matters
1. After completing the prescribed courses and passing the examination, the training personnel shall be awarded the “National Professional and Technical Talent Knowledge Update Engineering Training Certificate†by the Professional and Technical Personnel Management Department of the Ministry of Human Resources and Social Security, and the training hours shall be recorded as “Continuing Education for Professional and Technical Personnelâ€. certificate".
2. During the training period, the accommodation and accommodation of the participants shall be arranged in a unified manner (free of charge), and the transportation expenses shall be self-care.
V. Training costs
The training fee is 1,500 yuan/person, including lecture fees and room rental fees.
All relevant units will be invited to return to the Henan Mechanical Engineering Society e-mail box before September 26th. Since the senior seminar is limited to 70 people, we will arrange the quota according to the time sequence of reply receipts. After the full registration, we will no longer arrange receipts and receipts, and the relevant enterprises and personnel will send back the receipts as soon as possible.
Henan Mechanical Engineering Society Contact:
Guo Xinwei, Deputy Secretary General, 13803833758
Deputy Secretary Li Jian 13838188257
Office Phone
E-mail:
Address: Room 209, School Office, No. 2, Agricultural Road, Zhengzhou City
click to download: Annex I registration receipt
Annex II schedule
Annex III List of Instructors and Introduction
Henan Mechanical Engineering Society
September 11, 2014
Its main function is to only allow the medium to flow in one direction and prevent the flow in the opposite direction.
, Prevent the reverse rotation of the pump and the drive motor, and the discharge of the container medium. Check Valves may also be used on lines supplying auxiliary systems where pressure may rise above system pressure. Check valves are used in piping systems,
The check valve is a valve that automatically opens and closes the valve flap depending on the flow of the medium itself, allowing the medium to flow in one direction, and plays an important role in protecting the pipeline machinery and equipment from water hammer damage. Usually, this kind of valve works automatically. Under the action of fluid pressure flowing in one direction, the valve flap opens; when the fluid flows in the opposite direction, the fluid pressure and the self-coincident valve flap of the valve flap act on the valve seat, thereby cutting off the flow. The working characteristics of the check valve are that the load changes greatly, the opening and closing frequency is small, and once it is put into the closed or open state, the applicable period is very long, and it does not require the movement of moving parts. But once there is a "switching" requirement, it must be flexible,
Wafer check valve, the valve body is cast iron or cast steel, and the valve disc can be made of metal, depending on the performance requirements. The disc can be of all-metal construction, in the form of a rubber pad or rubber ring inlaid on the disc holder, or with a synthetic overlay.
Choose different materials, can be applied to water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea and other media.
Nominal pressure or pressure level: PN1.0-16.0MPa,
Nominal diameter or diameter: DN15~900,
Connection method: flange clip,
Applicable temperature: -196℃~540℃
Body Material: WCB, CAST IRON CF8(304) CF8M(316) CF3M(316L).
Disc Material: WCB, CAST IRON CF8(304) CF8M(316) CF3M(316L).
Notice on Holding a National Advanced Training Course on Superhard Materials and Products
A summary of the relevant units: In order to implement the national plan for long-term talent development, promote industrial restructuring and upgrading machinery manufacturing, better support continued innovation and development of superhard materials and products industry, according to the requirements of professional and technical personnel to update their knowledge engineering, the The Ministry of Human Resources and Social Security approved the preparation...
All relevant units: