Over the Spring Festival, many friends chose to renovate their home in the winter and live in a brand new home before the Spring Festival. Fortunately, the winter in the South is not too cold. This wish can still be achieved. However, due to the worse construction conditions in winter than other seasons, there are many issues to be aware of. Although we don't have to decorate our hands, understanding the relevant knowledge can minimize the unfavorable factors of winter decoration. Here are some tips for you. Low temperature is the primary enemy of winter decoration. Low temperatures combined with strong winds can have a great impact on building materials, such as woodworking, which can cause cracking at low temperatures and can make wall lacquer and tile construction difficult. Against weapons: keep room temperature stable Many renovation projects are limited by the construction temperature, such as paint or glue projects, generally require that the room temperature be around 5 degrees Celsius, otherwise there will be quality problems. Therefore, the winter decoration must control the room temperature, do not frequently switch windows, if you want to open the window ventilation should pay attention to the length of time, generally will not affect the construction within 30 minutes, but if the wind must not open the window, Especially in the middle of construction. The decoration works best under relatively stable temperature conditions, otherwise there will be problems with building materials, especially in the early and mid-term, the change of room temperature may cause some building materials to be deformed. For household heating users who can control their own room temperature, they should also pay attention to maintaining a constant temperature inside the room. Do not adjust the temperature too low because nobody is at night. To some extent, the low point of winter decoration temperature does not matter, as long as it is within the normal range will not have a great impact on the quality of construction, the most fear is the temperature fluctuations. dry Drying will cause cracks in the wood used for decoration. If the wall paint is applied under too dry conditions, problems such as cracking and blooming of colored paint will occur in the second year. Against weapons: warming building materials Winter decoration can not be stacked in the vents, such as windows, gates, etc., to avoid the harm caused by the inadvertently brought in the dry air; also pay attention to do not put the decoration materials too close to the radiator and other heating Beside the equipment to prevent them from deforming due to uneven heat, on the other hand, reduce their possibility of excessive drying. For the use of large and delicate wood conditions should also be done under the conditions of sealing paint, sealer treatment can not only reduce the loss of water can also be anti-fouling, do not both! In short, the winter decoration wood is best purchased in advance, placed in the indoor 3 to 5 days before use, so that its moisture content is close to the indoor humidity level, so as to ensure that the wood is not deformed. For the construction humidity range of other building materials, you should carefully check the product manual or consult relevant experts, if you can not reach the humidifier must perform moisturizing action. There is also the paint on the wall that was mentioned before. If the room is too dry, it must be humidified and then painted. Sequelae Proper construction can avoid many sequelae, such as the most common thermal expansion and contraction. Thermal expansion and contraction will cause wall cracking, floor warping, and even cause more serious problems such as emptying and falling of tiles and floor tiles. Against weapons: pay attention to "volume" construction The most important thing in winter construction is joints. For example, when laying floors, because of the low temperature, the plate will be in a contracted state. If it is too dense, it will expand in the summer and will not be deformed due to insufficient joints. The tiling and wall paints also exist. The problem, therefore, must be heavy construction, give it enough expansion joints, generally around the floor to leave about 2 mm expansion joints, tiles 0.2 mm. Another problem is that it must be done when the temperature of the material is about the same as the room temperature. Flooring is the same, ceramic tiles and floor tiles are also the same, but it should be noted that the temperature of water used for bricks in ceramic tiles and floor tiles in winter cannot be too low. When the water temperature is too low, it will cause the tiles to absorb slurry when they are bonded, resulting in adhesion with cement. Insecure connection, resulting in hollowing, falling off. Experience on the entrance decoration company paint interior decoration window switch housing floor tile tile adhesive floor tile ld tile Self Tapping Bolts,Self Tapping Screws For Metal,Self Drilling Metal Screws,Self Threading Bolts NINGBO YWC IMP. AND EXP. CO.,LTD , https://www.nbywc-fastener.com
Ott House Art Wall